High Quality Living Room Spc Vinyl Floor

High Quality Living Room spc vinyl floor Hot sale SPC vinyl floor,Abrasion resistant vinyl flooring factory   SPC means Stone Plastic Composite •An upgrade of LVT flooring •Made of lime stone ( calcium carbonate) +PVC powder + Stabilizer •Thickness of flooring: 3.2/4/5mm •Thickness of wear layer: 0.2/0.3/0.5/0.7mm •Structure of SPC PRODUCT FEATURES A. Waterproof and Damp proof        As the main component of SPC is stone power, so it performs well with water, and mildew will not happen with high humidity. B. Fire  Retardant        According to the authorities, 95% of the victims were burned in the fire caused by the toxic fumes and gases. The fire rating of SPC flooring is NFPA CLASS B. Flame retardant, not spontaneous combustion, leave the flame automatic out in 5 seconds, won't produce toxic of harmful gases. C. No Formaldehyde        Gold Lion SPC is high quality stone power & PVC resin, without harmful material such as benzene, formaldehyde, heavy metal. D. No Heavy Metal, No Lead Salt        The Stabilizer of Gold Lion SPC is Calcium zinc, no lead salt heavy metal. E.  Dimensionaly Stable         Exposed to 80° heat, 6 hours---Shrinkage ≤ 0.1%; Curling ≤ 0.2mm F. High Abrasion        SPC flooring has a transparent wear-resisting layer, whose revolution is up and higher than 10000 turns. G. Superfine Anti-sliping        SPC flooring has special skid resistance and wear-resisting layer of the floor. Compared with common floor, SPC flooring has higher friction when it's wet. H.  Low requirement of sub floor        Compared to traditional LVT, SPC flooring has a distinct advantage because it is rigid core, which can hide many imperfections of subfloor.   ITEM SPECIFICATIONS Thickness Of Plank Thickness of Wear layer Back Size of Plank UV Protected Colors 3.2mm 0.1-1.0mm +1.5mm IXPE/EVA/Cork 6*36” YES Multi Option 0.1-1.0mm +1.5mm IXPE/EVA/Cork 6*48” YES Multi Option 0.1-1.0mm +1.5mm IXPE/EVA/Cork 7*48” YES Multi Option 0.1-1.0mm +1.5mm IXPE/EVA/Cork 9*48” YES Multi Option 0.1-1.0mm +1.5mm IXPE/EVA/Cork 12*24” YES Multi Option   Thickness Of Plank Thickness of Wear layer Back Size of Plank UV Protected Colors 4mm 0.1-1.0mm +1.5mm IXPE/EVA/Cork 6*36” YES Multi Option 0.1-1.0mm +1.5mm IXPE/EVA/Cork 6*48” YES Multi Option 0.1-1.0mm +1.5mm IXPE/EVA/Cork 7*48” YES Multi Option 0.1-1.0mm +1.5mm IXPE/EVA/Cork 9*48” YES Multi Option 0.1-1.0mm +1.5mm IXPE/EVA/Cork 12*24” YES Multi Option   Thickness Of Plank Thickness of Wear layer Back Size of Plank UV Protected Colors 5mm 0.1-1.0mm +1.5mm IXPE/EVA/Cork 6*36” YES Multi Option 0.1-1.0mm +1.5mm IXPE/EVA/Cork 6*48” YES Multi Option 0.1-1.0mm +1.5mm IXPE/EVA/Cork 7*48” YES Multi Option 0.1-1.0mm +1.5mm IXPE/EVA/Cork 9*48” YES Multi Option 0.1-1.0mm +1.5mm IXPE/EVA/Cork 12*24” YES Multi Option   WARRANTY RESIDENTIAL WARRANTY Lifetime Limited COMMERCIAL WARRANTY 15 Years INSTALLATION   ●Place natural fiber rugs at entry points to help trap grit and absorb moisture that may damage the finish. This can protect the floors from dirt or wear. ●To prevent abrasive dirt and dust from accumulating and scratching the finish, vacuum, sweep or dust mop your floor once a week or more if needed. The vacuum head should be a brush or felt attachment. Do not use a vacuum with a beater bar head. ●We recommend Basic Coatings Squeaky Clean or Bona Hardwood Cleaner for regular cleaning and removing grease and smudges from your floor. ●Do not use harsh abrasive cleaners, bleach, ammonia or vinegar based cleaners, wax or acrylic polishes, or oil soaps. These may dull or damage the finish, leaving a greasy film and making the floor slippery and more difficult to clean. ●Protect your floor against direct sunlight or any intense source of artificial lighting. Over time, intense natural and artificial light may discolor the floors. ●Do not roll, or drag heavy objects across your floor. Do not wear shoes having heel taps, spikes, cleats, rocks, gravel or sharp objects protruding from the sole. ●Add felt pads to all furniture and chair legs to prevent damage to the floor. Replace the felt pads when dirty or worn. For extremely heavy objects, use wide, non staining rubber cups. Protective floor coverings for wheeled office furniture should be used.