Brief Introduction:
·Qil content of compressed air: 3~6PPm, Oil-gas granule of compressed air: ≤ 0.1μm
·Service life of the filter element: 3500~5200h (greatly affected by the quality of the lubricating oil and the working environment)
·Initial PSID (Pounds per Square Inch Differential): ≤0.02Mpa
·Lubricating oil should be controlled at prescribed position, which is commonly at 1/2~2/3 of the Oil Mist Separator.
·Secondary oil return pipe and one way valve should be kept unimpeded and in the prescribed position.
·Exhaust steam pressure should be adjusted to the prescribed value.
·Make sure the air compressor works at proper temperature and the pressure valve is in good condition.
Technical Parameters:
Testing standards
ISO 2941------Collapse & Burst Resistant
ISO 2942------Fabrication & Integrity Test
ISO 2943------Material Compatibility with Fluids
ISO 3724------Flow Fatigue Characteristics
ISO 3968------Pressure Drop vs. Flow Rate
ISO 16889------Multi-pass Performance Testing
Applications: