Prefabricated Steel Structure Poultry Farm Sheep Shelter Shed House

Steel structure sheep poultry house construction is made of light weight steel structure, it's widely used for the sheep farm shed. The roof can be made of corrugated steel sheet or sandwich panel which has good insulation. The wall is built with steel mesh or sandwich panel. Therefore the Goat house shed is very resistant to wind, impact and climate change. Share:  Inquire NowNext Product Product Description General considerations for sheep and goat housing Provision of simple shed with low cost housing materials is enough for sheep and goat for its optimum production efficiency. Sheds with mud floor are suitable for most of parts of the country except where high rainfall is observed. The sheds should be constructed in an elevated area to prevent water stagnation. Fodder trees can be grown around the shed, which acts as a source of feed for the growing goats. Clean drinking water should be available for goats. Sheds should be constructed with proper ventilation. Walls of the shed should be free from cracks or holes, while constructing. Floors of the shed should be firm and should have the capacity to absorb water. The floors should be constructed in such a way, so that it should be easily cleaned. Types of sheds depend on the system of rearing. Open type housing with a covered area and run space is generally enough. The run space should be covered by chain links. The covered area is used for shelter of animals during night and adverse climatic conditions.  For a comfortable house east-west orientation with generous provision for ventilation /air movement to dry the floor will be suitable. Thatched roof is best suited one due to cheaper cost and durability. However corrugated asbestos sheets can also be used for organized farms to minimize the recurring costs andto have longer durability. Gable roofing is generally preferred. For small sheds lean to type roofing is advisable. When the animals are taken for grazing during the day time and sheltered only during night, the covered space will be enough. When the animals are housed intensively, the pen and run system of housing is suitable. There is no restriction for the length of the shelter, however breadth of shed should not exceed 12 meter and optimum breadth of shelter is 8 meter. Height of eave should be 2.5 meter and height at ridge should be 3.5 meter. The height of chain link used for open space should be 4 feet. The length of the overhang should be 75cm – 1 meter. Separate feeders and water troughs should be placed for concentrate feeds, green fodders and water. Features 1: Shed Design: It does not require heavy maintenance and can withstand extreme climate. More than maintenance, building a housing structure for farm animals poses a challenge for farmers. 2: Low Cost.  Compared to traditional building, it is easy to install, and the materials is low cost. It save farmers money of installation, 3: Durable materials One of the advantages of the model shed is that it could be reassembled and reinstalled. thanks to durable materials like galvanized H steel structure,the structure can withstand adverse climatic conditions and does not require heavy maintenance.