Vertical Machining Center - VMC1050E

Vertical machining center VMC series is suitable for the plate, plate and shell type, moulds and other precision machining of complex parts, machine tool with automatic tool change CNC system, fully enclosed shield, automatic lubrication system, cooling system, the chip at the back, a clamping parts can complete milling, boring, drilling, expansion, reaming, tapping and other processes more than precision machining, optional fourth axis machining. 1. The main structure by the finite element analysis of machine tool base, column, spindle box body, such as cross sliding table, the table is made of high quality precision casting, through the secondary aging treatment, to ensure the stability of long-term processing. 2. VMC500, VMC600, VMC700E, VMC850, VMC1050 spindle spindle unit standard on Taiwan, VMC320, VMC400, VMC420E, VMV600E standard domestic spindle unit (optional motorized spindle).Powerful spindle servo motor, spindle unit speed can reach 8000 r/min, suitable for gravity cutting at low speed, high speed light is suitable for precision cutting, wide application range. 3. The X, Y, Z three axis adopt imported large size heavy load line rail (except VMC600), increase the support stiffness and the machining accuracy.Three axis screw are processed by pretensioning, high-speed operation, to prevent thermal deformation, to ensure accuracy. 4. Y big trip VMC400, VCM600E, heightening the Z axis VMC850, VMC1050, covering most of the special-shaped parts processing requirements. 5. Adopt Taiwan precision leadscrew, Taiwan surplus tin precision lock nut, screw bearing adopts Japan NSK bearings, flexible coupling with the league, back small gap, sensitive, high accuracy, etc. 6. The pitch drive shaft adopt high precision laser interferometer, clearance error of fine pitch error compensation, make each axis positioning accuracy is more accurate, more suitable for processing of high precision parts. 7. VMC500, VMC600, VMC700E, VMC850, VMC1050 electrical cabinets box with air conditioning system, VMC320, VMC400, VMC420E, VMC600 standard heat exchanger (air conditioning) is optional.Cooling ability to guarantee the normal work of the machine tool in high temperature season, extend the life of the machine tool. 8. The automatic quantitative clearance centralized lubrication device is adopted to guide rail, screw moving parts such as lubrication. 9. Before sliding door and side door glass without using thick laminated tempered glass, enhance security. 10. All can match in front of the chip removal device (left). VMC1050E Table size 1300×520mm The workbench maximum load 600kg TType slot (groove widthxSlot numberxSlot pitch) 18 * 5 * 90 XAxis stroke 1050mm YAxis stroke 500mm ZAxis stroke 670mm The dimension from the centerline of the main shaft to post positive 580mm The spindle nose and workbench 130-800mm Guide form Linear guide (roller) X,Y,ZFast moving speed 30000mm/min Highest spindle speed 8000rpm/*12000rpm The spindle taper hole BT40 Φ (150). Spindle power 7.5kW/*11kW Dao database is Disc type24the Maximum weight of the tool 8kg Tool change time Disc type≤3/S X,Y,ZPositioning accuracy 0.016/0.020/0.016 X,Y,ZRepeat positioning accuracy 0.008/0.008/0.008 Air pressure 0.5-0.8Mpa Electric cabinet box cooling The air conditioning Installation dimensions (longxwidexHigh) 3000×2400×3000mm Weight (about) 6300kg