Quick Details
- Processing Time:15
- Port:ningbo
- Supply Ability: 10 Acres Per Week
- Brand Name:-
resistance GB/T1771-91 No change in coating film for 1000 hours,single side corrosion<2mm at the cross-section
Wet heat
resistance GB/TI740-79 >1000 hours of light loss,≥l
Corrosion
resistance Photoaging test ASTM Gl540UV0.78w/m/@340nm 500h Guaranteed light rate
≥80%
Note: The above parameters are laboratory data and are for reference only. The actual indicators are related to the customer's environment, equipment, substrate, pre-treatment, spraying process
and other factors.
APPLICATION CONDITION
Pre-treatment: phosphating treatment, inscription processing; jet black 9005 powder coating is suitable for the following equipment coating: corona electrostatic spraying, friction electrostatic
spraying, electrostatic fluidized bed spraying.Curing conditions:200·C@ 10 minutes,1800C @ 15 minutes, can also be designed according to customer needs.
PACKAGE
Packed in carton, net weight 20kg/carton, lined with polyethylene plastic bag
STORAGE CONDITIONS
Dry and ventilated indoor storage below 30 C, avoid direct sunlight. Under these conditions, the powder can be stored stably for 12 months. If it meets the requirements, it can still be used.
SAFE AND HEALTHY
All raw materials of powder coating do not contain toxic substances, and will not release toxic gases during baking.
but should avoid inhaling dust during use. Operators should wear dust masks and minimize long-term contact between skin and powder. The paint on the skin can be washed with soap.