99% Sic Of High Density F36 Grit Green Silicon Carbide Grain Used In Producing Grinding Wheel

General Silicon Carbide Information Silicon carbide is composed of tetrahedra of carbon and silicon atoms with strong bonds in the crystal lattice. This produces a very hard and strong material. Silicon carbide is not attacked by any acids or alkalis or molten salts up to 800°C. In air, SiC forms a protective silicon oxide coating at 1200°C and is able to be used up to 1600°C. The high thermal conductivity coupled with low thermal expansion and high strength give this material exceptional thermal shock resistant qualities. Macro Grit Specifications Product Name Green Silicon Carbide Chemical Composition  (%) SiC 99 F.C 0.2 T.Fe 0.2 Bulk Density (g/cm3) Min. Max. 1,43 1,51 Grain Size F36 Remark: ● All information and technical data are given as a guide only. Although every effort has been made to ensure that the information is correct, no warranty is given as to its completeness or accuracy. Exact specification and sizes will be made strictly according to your rigid requirement. ● All specifications and sizes could be customized. ● For more specifications and detailed information, you are warmly welcome to visit our official website Benefits Faster cutting and surface smoothing, shorter work cycles, increased production Longer cutting life, increased cost-effectiveness, less dust and less clean-up Predictable, repeatable results Ideal for a variety of applications including grinding, lapping, polishing, and blasting Applications Lapping and Polishing Slurry Sawing Quartz Brake Shoes for Trains Ceramic Coatings Buffing Compounds Wear Components Heating Elements Coated Abrasives Igniters Toner Applications Electronic Packaging Ceramic Pumps Wire-sawing Semiconductor Materials Ceramic and Metal Matrix Composites Metal Finishing Brushes and Rolls, Etc. Granite and Marble Polishing Polishing of Precious Stones and Lapidary Dispersion in Nickel Matrix for Wear-Resistant Layers, e.g., Cylinders Ceramic Seals and Rings Wet and Dry Micro-Blasting Grinding Media Finishing Ball Bearings “Scratching” Memory Discs