Quick Details
- input size:10 mm
- final product size:325-1500 mesh
- main motor:D97 kw
- production:1-6.5 t/h
- total weight:26.5 ton
- power:225 kw
- dimension:13*5*8 m
- Processing Time:30 days
- Port:Shenzhen
- Supply Ability: 10 Sets Per Month
- Brand Name:Hengda
MR128 stone grinding pulverizer stable performance principle machine is a domestic first products produced according the customer’s requirements on the
production of 325-1500 meshes, after 3 year reseach by technical department and experienced practice of one years, it is a new equipment used for processing of the material of coal ash,
talc, zirconite and so on.
Main features:
1.Wide range of processing materials, so far, it is the special equipment used for processing the mental ores material of 325- 1500 meshes in domestic.
2.Low cost of spare parts is less, the cost is about 10% of the ring roll grinders.
3.It is easy to maintain, service, replace, repair the vulnerable parts, the time of repair is just half day.
4.The Power consumption is low while the produce is high,pollution-free, Efficient pulse dust remove is adopted, and there is no dust pollution during whole
processing, and Quieter room is equipped to reduce the noise pollution.
5.the quality of the powder is high with concentrated size, and powder being on average, and high content of micro
powder.
MR128 stone grinding pulverizer stable performance principle machine application scope:
1.chemical engineering, construction materials fields such as Glass rubber pharmaceutical ceramics, Paint phosphate paper and so on,
All kinds of Non-flammable and explosive non-metallic Non-flammable and explosive non-metallic materials with Mohs hardness of below 9, and The humidity under 6.
2.breakthrough the grind of the hard material, powder material, light gravity like A zorite, talc and skin of
trees.
3.Can feed fully with powder such as coal fly ash.
Principle of work
Micro powder grinder sytem comprises with main machine, classifier, fan, Bucket elevator, screw feeder, stock bin, crusher, pipe
system, pulse collection system, electric control cabinet, Electric machinery etc.
Materials are crushed into material of less than 10mm by the cusher, then transftered to the stock bin, and fed by the belt conveyer with
quantify, and then equably send to host for grind. At the same time, High pressure and large flow air fan system and pulverized powder mixed into
high concentration air and classifies in the classifier above the host, the powder particle which size does not reach the fineness of
finished product powder fall back into the host of machine, the powder particle that reach the finished particle size of powder are
blew into the pulse collection system with the airflow, and finally discharge out and form product through the feed pipe, the air of purification flows though the piping system into the fan with
which then be discharged into the atmosphere. The whole air supply system is open, the flow system flows under negative pressure. The workshop is environmental protection.
Principle of main machine
When materials fed by the belt conveyer with quantify, and then equably send to the
sealed grinding chamber of host for grind. The material is, then in the
grinding chamber the material is transferred into the material layer formed between the grinding wheel and The grinding body, the material
is grinded in the grinding body by the grind wheel with positive pressure and rotation.
More details please contact Bubble
Tel: 008618677302539
Email: