Reactive Dye,new Substitutes Chemicals For Soda Ash(1:10),pure Cotton Fiber Used Soda Ash Replacement

pure cotton fiber used soda ash replacement,new substitutes chemicals for soda ash,soda ash substitute manufacturer,Alternative alkali manufacturers 1.Soda Ash Substitute (1:10),new substitutes chemicals for soda ash,sell soda ash substitute,    reactive dye instead of alkali is an optimized alkali agent for reactive dye dyeing process. It has a good buffering effect. 2. Soda Ash Substitute (1:10),new substitutes chemicals for soda ash,sell soda ash substitute,   Cloth surface effect: even with poor water quality and high calcium and magnesium ion concentration, there is no white spot caused by soda ash  due to uncleaned carbonate residue; 3. Soda Ash Substitute (1:10),new substitutes chemicals for soda ash,sell soda ash substitute Advantages: convenient materialization, convenient management and low cost; 4. Soda Ash Substitute (1:10),new substitutes chemicals for soda ash,sell soda ash substitute Suitability: suitable for simultaneous dyeing and fixing of various equipment, reactive dyes and different water ratios; 5. Soda Ash Substitute (1:10),new substitutes chemicals for soda ash,sell soda ash substitute Safety and environmental protection, excluding APE0. Specification of Soda Ash Substitute (1:10),new substitutes chemicals for soda ash,sell soda ash substitute Appearance White Powder Main Ingredient Alkali PH(1% dilution) 12.5±1 Ionic nature Anion Solubility Dissolve into warm water easily Solid content ≥90% Our Service: 1)-We 100% inspect our finished product. 2)-Packing with pallet as buyer's special request 3)-Best service after shipment with emails 4)-Cargoes photo before and after loading into container  5)Full experience of large numbers containers loading in Chinese sea port 6)Fast shipment by reputed shipping line 7)Cargoes together with container sales service available 8)Raw materials from China origin. [usage] Chemical: to accurately weigh the specified amount, dilute it with 10 times of water in the boiling water, and then add the dye VAT. Add: the first 1/3 amount should be added slowly, and the second 2/3 amount should be added once. Dosage: use 1/8-1/10 of the amount of soda ash, and add 2g/l of soda ash for better color.Specific dosage shall be adjusted according to the factory process. Dip: bath ratio > 10 according to the water ratio;Bath ratio < 10 by cloth weight. For details,please contact us: email:sales01hengchang(at)163 dot com mobile:+86-13315775702 wechat:+86-13315775702