Thin Stamped Flat Sheet Aluminum 6082 With Hot Rolling

Product Description Aluminum plate  6082 is typically supplied as plate and sheet from Mingtai Al. it is an aluminum primarily alloyed with silicon and manganese. The addition of manganese controls the grain structure which in turn results in a stronger alloy. The most common tempers for 6082 aluminum are O, T4, T6 and T651 and 6082 is slightly higher mechanical properties in the T6 condition when bending or forming. Mingtai Aluminum alloy 6082 also corresponds to DIN 3.2315, EN AW-6082 and AA6082 standard designations and specifications but may not be a direct equivalent.    Alloy No. Si Fe Cu Mn Mg Cr Zn Ti Others Al 6082 0.7-1.3 0.5 0.10 0.40-1.0 1.6-1.2 0.25 0.20 0.10 0.20 REMAIN 6082 Aluminum Alloy Products Products Type Temper Thickness(mm) Width(mm) Length(mm) 6063 aluminum sheet Bare, Mill Finish O T4 T6 T651 0.3-8 Up to 2600 Up to16000 6063 aluminum plate 8-600 Up to 3300 Up to 16000    More details, please click here:  Strength of Mingai   Features&Application Typical material properties for 6082 aluminum alloy include weldability, brazability, solderability se well as machinability. Besides, alloy 6082 is a medium strength alloy with excellent corrosion resistance. So various commercial joining methods (welding, brazing, etc.) can be easily applied to 6082 alloy. Since 6082 is a heat treatable alloy, strength will be reduced in the weld region. 6082 aluminum sheet and plate are typically formed by rolling. Mingtai offers alloy 6082 plate and sheet for highly stressed applications includes trusses, bridges, cranes, transport applications as well as mould.  Packaging & Shipping Our Services   Pre-sales Service: 1. For partial materials, we can supply the sample free (without the freight charge). 2. Customers are welcomed to visit the factory. After Sales Service: 1. Quality assurance certificate will be supplied with products 2. The customer can claim for compensation if the products are not check with the sample. 3. The products could be returned due to products quality. Payment terms 30% deposit by T/T before production, and the other 70% balance should be paid by T/T before delivery. And we also accept L/C. Company Information O verview    Henan Mingtai Aluminum Co., Ltd. (referred to as Mingtai Al. for short) is a large modern aluminum processing enterprise that integrates processing, manufacturing, and scientific research. It primarily engaged in the producing and selling. The company consists of two main production bases, one is located in Gongyi City and the other lies in the high and new technology industrial development zone in Zhengzhou City, Henan Province, with an area of 250,000 square meters. Mingtai Al. has over 2600 employees, ten continuous casting production lines and more than 44 other large-scale processing equipments with an annual production of 450,000 tons. Scope of Service    Presently, the company’s products cover aluminum alloy products of Series 1xxx, Series 2xxx, Series 3xxx, Series 4xxx, Series 5xxx, Series 6xxx, Series 7xxx, Series 8xxx of different sizes. Main products include CTP plate stock, PS plate stock, aluminum electrode capacitor foil, foil stock, deep-draw stock, brazing sheet, alloy sheet and plate, etc. Those products are widely applied in industries including automobile making, traffic and transportation, packaging and containers, buildings and decorations, electrical and electronic, printing, etc.  Development Strategy    In 2016, Mingtai Al. will continue to stick to the enterprise spirit of “solidarity, endeavor, objectivity and innovation”; practice the management concept of “green and sustainable development, rely on the high speed development of science and technology”; strive for the goal of “taking a lead in the aluminum processing industry around the world”, achieve sustainable development and contribute to the development of society. FAQ  Q1: When can I get your reply after the inquiry? A1: Within 12 hours, our professional sales rep will contact you to offer a quote.   Q2: What are the terms of payment? A2: We can accept 100% irrevocable LC at sight, deposit 30% T/T, etc.   Q3: What kinds of alloy can you supply? A3: 1xxx-8xxxx series.   Q4: What if I want to know more details about your company and products? A4: Please kindly refer to our official website at     for more information.