Quick Details
- Temper:T3-T8
- Thickness:5-150mm
- Width:1000-2000mm
- Place of Origin:Henan, China (Mainland)
- Certification:SGS
- Processing Time:20-25dayas
- Port:Tianjin/Qingdao
- Supply Ability: 3500 Tons Per Month
- Brand Name:Mingtai
Product Description
The 7075 aluminum alloy is capable of high strength as developed by heat treating. It also has excellent properties at low temperatures.
Machinability: It is best to machine this alloy in the annealed condition. Machining capability is good and oil lubricants should be used.
Welding: Resistance welding is the only preferred method of joining AL 7075 alloy. Gas welding should be avoided and use of arc welding may result in degradation of
corrosion resistance.
Electrical conductivity 36% of copper. Shear strength in O condition is 22 ksi and for the T6 condition it is 48 ksi.
7075 Aluminum Alloy Chemical Composition Limits
Si
Fe
Cu
Mn
Mg
Cr
Zn
Ti
Others
Aluminum
0.4
0.5
1.2-2.0
0.3
2.1-2.9
0.18-0.28
5.1-6.1
0.2
0.15
remain
Packaging & Shipping
Packaging Details:
(1)Standard seaworthy export packing, wooden pallets with plastics protection for the coil and
sheet;
(2)The packaging for coil can be eye to sky or eye to wall based on the customer’s
requirement;
(3)16-20MT can be loaded into 20’ container, and 21-24MT is more suitable in 40’ container;
(4)The other packaging can be made based on the customer’s requirement.
Shipping Detail: Sea Worthy
Our Services
Pre-sales Service:
1. For partial materials, we can supply the sample free (without the freight charge).
2. Customers are welcomed to visit the factory.
After Sales Service:
1. Quality assurance certificate will be supplied with products
2. The customer can claim for compensation if the products are not check with the sample.
3. The products could be returned due to products quality.
Payment terms
30% deposit by T/T before production, and the other 70% balance should be paid by T/T before delivery. And we also accept L/C.
FAQ
Q1: When can I get your reply after the inquiry?
A1: Within 12 hours, our professional sales rep will contact you to offer a quote.
Q2: What are the terms of payment?
A2: We can accept 100% irrevocable LC at sight, deposit 30% T/T, etc.
Q3: What kinds of alloy can you supply?
A3: 1xxx-8xxxx series.
Q4: What if I want to know more details about your company and products?
A4: Please kindly refer to our official website at for more information.
