Battery Flame Arrestor

PP BATTERY FLAME ARRESTORS are designed to allow the flow of gases, liquids, etc. and to prevent flame transmission. The gap width and gap length of the flame arrestor determine its performance. The narrower and longer of the gap, the greater the fire extinguishing effect. The wider and shorter of the gap, the smaller the pressure loss. The best solution between the two conditions was determined experimentally. 1. PP battery filter disc (flame arrestor) is prepared based on the air floating semi-melt mould pressing method under the real-time control of a microcomputer, in combination with power semi-melt control technique under air floating state,control technique of porous membrane product conformance,and control technique of porosity changes in a gradient form along the thick direction during micro-pore molding. 2. PP battery filter disc (flame arrestor) is characterized by excellent resistance to flame,acid fog,acid and alkali,prevent the electrolyte corrosion to the car and the surrounding environment. 3. PP battery filter disc (flame arrestor) is remarkable in its mechanical strength and even in the conformance of dimension scale,and has good acid resistance and bearing capacity,which can rival like products in foreign markets. 4. JHTD micro-pore polyethylene and polypropylene can be designed subject to the requirements of users on the product,and can be made into series such as polypropylene and polyethylene compounded micro-pore filter element,and PTFE disc and films. 5. No distinction between front side and reverse side, better than some Amercian company.