A Grade Trina ISO9001 5BB 36V 340W Monocrystalline Solar Plate For Home Use With Clean Energy In Florida

Mono solar panel 340Watt Basic information Model JS-36340M Category Mono Electrical performance parameter（STC） Maximum power-Pmax Wp 340 Power tolerance % 0～+3 Maximum Power Voltage-Vmp V 36 Maximum  Operating Current-Imp A 9.58 Open circuit voltage-Voc V 43.2 Short-circuit current-Isc A 10.25 Maximum System Voltage-VDC V 1000 Solar Cell Efficiency-ηm % ﹥19.5% Standard test condition STC Irradiance1000W/m2 ,ambient temperature25℃ ，Atmospheric qualityAM1.5 Components & Mechanical Data Solar Cell Mono silicon，156*156mm slice Number of Cell 72pc Size of Module 1856*992*35 Weight Per Piece 21.6kg Module glass 3.2mm，High penetration, anti - reflection suede toughened glass. Module backplane 0.35mm white Module frame Silver and anodized aluminum alloy Junction Box Type PV-LH0702 Wire 4mm2 Temperature Coefficients Working temperature ﹣40～+85℃ Temperature Coefficients of Voc(%)°C -0.41%/℃ Temperature Coefficients of Pm(%)°C -0.32%/℃ Temperature Coefficients of Im(%)°C 0.055%/℃ NOCT   45℃±2℃ Features of solar module: 1.High efficiency solar cells with high transmission and textured glass are delivering high efficiency for modules; 2.Bypass diode minimizes the power drop caused by shade; 3.Tempered glass, EVA resin, and weatherproof film, plus aluminum frame for extended outdoor use; 4.Modules independently tested to ensure conformance with certification  and regulatory standards; 5. Manufacturing facility certified to ISO9001 ISO14001 quality management system standards.   Description of every parts: 1.Junction Box in proof-water with TUV Certificate 2.Solar Cable & Connector with TUV Certificate 4.Toughed Glass: The glass is super white cloth grain of toughened glass , the thickness of 3.2mm ,  the solar cell spectral response range of wavelengths (320-1100 nm), light transmittance over 91% , Ultraviolet light radiation , light transmittance is not falling .Toughened glass is made of components can withstand 25 mm in diameter of hockey hit at a speed of 23 m/s. 5.EVA:  0.5 mm thickness with high quality EVA film as sealant of solar cell and and the connection between the glass, TPT agent. With high light transmittance and anti-aging ability. Solar cell encapsulation of EVA film after curing performance requirements: Light transmittance is greater than 91% ; Crosslinking degree is during from 70 to 90% ; Peel strength (N/cm), glass/film is more than 30 ; TPT/film is more than 15 ; Temperature resistance is from - 40° C to 85° C. 6.TPT BackSheet: the back of the solar panel, ageing resistance , corrosion resistance , resistance to ultraviolet radiation, airtight, etc. Basic requirements. 7.Frame: aluminum alloy frame with high intensit , mechanical shock resistance ability.Strong, lightweight aluminum frame design with reinforced sealing and load hold to prevent freezing and warping, and stand against high wind.