Premium Crystal Resin_Crysin UV

Premium Crystal Resin_Crysin UV Description UV/LED CURING RESIN CRYSIN UV is a premium hybrid UV curable resin. This multi-purpose resin is suitable for both casting (maximum depth per cure should not exceed 1cm) and doming jobs. [Curing time] UV LED (72W) : 1-5 minutes UV lamp (365nm) : 2-6 minutes Natural light : 5-15 minutes Natural light (on a cloudy day) : 20-40 minutes Key Features 1. Crystal clarity 2. Self-defoaming 3. Shore D Hardness of 80 or above 4. Deep casting between 25-50mm per pour 5. Naver top-selling products Direction 1. Use a digital scale to exactly weigh each of Crysin resin and hardener according to the specified ratio. *Crysin 2.5 has a mixing ratio of resin 2 and hardener 1. *Crysin 5.0 has a mixing ratio of resin 3 and hardener 1. 2. Slowly mix the mixture for at least three minutes by hand and 2 minutes by a electric mixer. 3. Carefully pour the mixture into a mold or container 4. Do not use a torch to eliminate the surface bubble, this process can yellow the resin or cause the surface to deform. 5. Keep the ambient temperature to 25°C. 6. Crysin 2.5 will cure to touch within 24 hours and Crysin 5.0 within 36 hours. 7. If liquid colorant is added, do not exceed the colorant by 1% by weight and additional curing time may be needed. 8. Crysin 2.5 can be poured at 25mm at maximum per pour and Crysin 5.0 can be poured at 50mm at maximum per pour. If additional thickness is needed, conduct additional pour after curing for at least 12-24hours. 9. Surface can be sanded or polished after a full cure. Usually full cure is completed within 72 hours. CRYSIN UV Viscosity : Low Superior in clearity and suitable for thin and delicate coats. Easy for beginner users to use Its watery viscosity makes it suitable to be used in a complex mould for casting work. CRYSIN UV HEAVY Viscosity : High Superior in clearity The optimal resin for domin g work as its high viscosity makes doming work and side-application easy. CRYSIN UV ECO Viscosity : Medium Multi-purpose resin, suitable for both casting and doming jobs Close to odour-free and is suitable for sensitive users. May show some yellowness immediately after curing but the clarity comes back as time lapses. CRYSIN UV ECO LIGHT Viscosity : Low Its watery viscosity makes it suitable to be used in a complex mould for casting work. Close to odour-free and is suitable for sensitive users. May show some yellowness immediately after curing but the clarity comes back as time lapses. Cautions 1. Do not drink 2. Do not add the liquid into a spray bottle 3. Keep out of reach of children and infants 4. Do not throw the container 5. Do not leave the product on skin for long duration. Rinse skin with warm running water and soap 6. Wearing protective gloves, protective clothing, eye protection is recommended 7. Store the product in a well ventilated area away from heat/sparks/open flames/hot surfaces 8. In case of fire, use alcohol-resistant foam, dry powder, or sand