O2 PSA Generator

O2 PSA Generator Introduction O2 PSA generator utilizes ZMS(Zeolite Molecular Sieve) to separate the oxygen gas from air. The Principle is to make use of different adsorption force of gases in air at pressure equalizing. The whole process of O2 PSA generator consists of Pressurization, Production, Purge, Equilibrium of pressure and Desorption. Ambient air contains 21% oxygen, 78% nitrogen, 0.9% Argon and 0.1% other gases. ASPE Inc. Pressure Swing Adsorption (PSA) oxygen generators utilize Zeolite Molecular Sieve (ZMS) to separate oxygen from air, which adsorbs nitrogen from compressed air using air compressor and desorbs it at atmospheric pressure. ASPE Inc. PSA oxygen generators contain two adsorbent vessels. When the first vessel produces oxygen gas, the second vessel proceeds with desorption process for production. This process consists of Pressurization, Production, Purge, Equilibrium of pressure and Desorption and continually repeats for oxygen production. • Technical Spec. (Standards) • O2 Flow (Max.) : 2,000 Nm3/h • O2 Purity (Max.) : 90 to 99% • O2 Cylinder Filling : 150 bar Grecommended Application Hospital, Fish Farm, Complete combustion, Ozone, Fermentation, Sewage treatment plant, cutting/brazing. 1. Air Compressor Air compressor is the equipment used to produce compressed air. Compressed air is used for separating oxygen from air. In the process fo compression, moisture and heat happen. to remove them, built-in or independent air dryers and after-coolers are necessary 2. Air receiver Tank Air receiver tank is the equipment used to keep supplying compressed air of certain pressure to the oxygen generator stably. it is also for the purpose of handling the load of compressor properly. 3. Filter Filter is used for removing dust, particle and oil in the compressed air. 4. Desiccant air dryer This is used for removing moisture by using adsorbent. It consists two adsorbers and it has the repeated cycles of adsorption and regeneration. 5. PSA Generator In order to separate the oxygen from the compressed air, ZMS(Zeolite Molecular Sieve) is used as adsorbent. O2 PSA system consist of pressurization, production, purge, equilibrium of pressure and regeneration. 6. Oxygen storage Tank It is a buffer (storage) tank used to supply the processed oxygen with certain pressure, purity and flow. 7. LCP LCP has control of the whole system into operating automatically or manually. It also indicates purity, pressure and flow of the produced oxygen. 8. Oxygen supply The purity of the produced oxygen is 90-95%. Flow and pressure depend on customer's needs. 9. High pressure Compressor It is a high pressure compressor to fill oxygen cylinders at 125-150BarG. 10. Manifold and Oxygen cylinder Pipelines are designed to fill oxygen cylinders at the same time and cylinders are connected at the end of manifold. Specification Model O2 Flow (Nm3/h) Size(W*D*H) Weight (Kg) O-2 2 685*570*1566 390 O-3 3 800*640*1623 510 O-5 5 850*680*1966 710 O-8 8 1080*812*1863 940 O-10 10 1080*812*2192 1120 O-12 12 1230*920*2207 1260 O-15 15 1330*980*2270 1470 O-18 18 1621*1237*2664 1630 O-21 21 1621*1237*2820 1690 O-23 23 1821*1310*2823 2120 O-25 25 1821*1310*2909 2140 O-30 30 1822*1361*2980 2620 O-35 35 2126*1513*2891 3020 O-40 40 2126*1513*3100 3400 O-45 45 2126*1513*3410 3670 O-50 50 2329*1615*3426 4420 O-60 60 2329*1816*3400 4700 O-70 70 2732*1816*3466 5440 O-100 100 3138*2019*3738 7130 O-120 120 3488*2194*4000 8100 O-140 140 3488*2194*4209 9330 - Inlet Air Pressue: 95PSIG, Output Productive Pressure: 65 PSIG - Purity: 93%(±2) - Voltage: 220V / 60 (50)Hz / 1 Phase Supply Details Customization. If you want to know specific information, please contact me. We are able to meet any requirements.