Quick Details
- Capacity:15kl/h
- Function:Oil recovery machine
- Featue:Disc type collection method
- Processing Time:45-60 Days
- Port:-
- Supply Ability: 10 Pieces
- Brand Name:KOSED
KOSED-15
Product description
This equipment is used to separate and recover the oil contained in the water when an oil
spill accident occurs at sea. It is an electric and electronic skimmer that breaks away from the hydraulic drive method of most existing skimmers. Driven by battery (DC48V) or converter
(AC220V → DC48V conversion) depending on option (Operation is also possible using a 3kw small generator) It weighs 5/1 compared to hydraulic equipment and is characterized by safe and
convenient maintenance with a low difficulty operation method by full-function remote control. In particular, since engine hydraulic power packs and hydraulic hoses are not required, the
health and safety of workers due to exhaust fumes can be improved, unintentional secondary contamination due to bursting hydraulic lines can be prevented, and dispatch time in urgent
situations such as oil spills can be dramatically reduced. It is a device that can be shortened to.
Overview
A disc-type electric skimmer equipped with a self-navigation device, suitable for
recovering light oil.
Operating principle
Put the main body into the contaminated site, put oil on the rotating disk, separate it
with a scraper, and collect it using the centrifugal pump installed on the lower part of the head.
Detailed specifications
Recoverable viscosity
4,000 cst or less
Type
Adsorption (disc)
Recovery capacity
15㎘/h
Manufacturer (Nationality)
Korea Marine Environment Corporation (KOEM), Seongdong Ocean Tech, Inc.
(Korea)
Configuration details
Division
Specifications and Features
SKIMMER HEAD
L × W × H
72×90×58(㎝)
Weight
48㎏
Number of disks
8ea
Material
ABS, Aluminum, Stainless
Pump
1 Centrifugal pump built-in
Self-defense device
2Units, 1.5knot
Recommended environment(temperature)
0 ~ 50℃
Battery
L × W × H
19.5×40.5×23(㎝)
Weight
14kg
Output power
Output: DC48V
Usage time
4~6hours
Charging time and recommended temperature
6~8hours (Discharge->Fully charged), 0 ~ 45℃
Recommended environment(temperature)
-20℃ ~ 50℃
Remote controller
Model
HBC(社) FST727 Spectrum B
Manual Remote controller
L × W × H
16×8×6(㎝)
Receiveable distance
Maximum 150(m)
HOSE
Hose standard
1″×30m×1set
PUMP
Maximum vertical lift
20(m)
Device Description
【Electric drive type skimmer】
KOSED-15 breaks away from the hydraulic drive method that conventional skimmers have
adhered to, and solves the problems of existing hydraulic skimmers. It is an equipment that greatly improves the convenience of workers by improving the inconveniences that workers have
experienced directly, such as lightening heavy equipment, simplifying accessory equipment with complex configurations, and improving the working environment. It was developed to improve
convenience.
【 Device Features 】
The oil transfer pump (BLDC electric pump) applied to KOSED-15 is driven by direct supply
of electricity from the power source, and has a higher driving force than the hydraulic pump of the existing hydraulic oil collector. This is the effect of simplifying the driving process of
the pump. The hydraulic pump of the existing oil collector is operated through a process of 5 steps (engine→hydraulic pump→hydraulic distributor→hydraulic motor→oil transfer pump), whereas
the electric pump of this technology Drive energy loss can be prevented by directly using the power from the battery for driving. This simplification of the process also has a side effect of
removing auxiliary materials (hydraulic control unit, hydraulic line, etc.) installed inside the equipment, so that it can be made smaller and lighter than existing pumps, so high-efficiency
work results can be expected.