316L Stainless Steel Industrial Filtration Metal Fiber Sintered Felt Filter Media Filter Plate

QL sintered metal fiber felt is a non-woven media created from randomly laid short metal fibers through sintering and bonding. It consists of very fine metal fibers and it features a high porosity which is ideal for high temperature and high viscosity fluid filtration. Stainless steel type 316L is the most used material while FeCrAl, nickel, Hastalloy, Inconel are also available. Wire mesh is sintered as a support when needed. Besides, the fiber diameters, web structures, layer configurations can be changed to match specific application.     Characteristics: 1. Uniform pore size distribution 2. High dirt-holding capacity due to its multi-layer structure 3. Easy to clean and back flush in situ 4. Long on-stream life 5. High temperature resistance 6. High corrosion resistance 7. High degree of mechanical flexibility Applications: 1. High viscosity polymer filter for synthetic fibers,film,plastics and more 2. Chemicals, pharmaceutics, petrochemicals, food and beverages, hydraulic, fuel oil, lube oil,etc. 3. Petroleum refining process 4. High temperature exhaust gas processing filters 5. Oil mist separator Series Absolute filter rating ( μ m) Thickness (mm) Porosity (%) Mean B.P.P(pa) A.P   at   200pa (l/min.d m 2 ) 10KIA 3 10 0.30 75 3700 110 15KIA 3 15 0.37 75 2470 190 20KIA 3 20 0.45 80 1850 300 25KIA 3 25 0.61 80 1480 350 30KIA 3 30 0.63 80 1230 500 40KIA 3 40 0.66 78 925 620 60KIA 3 60 0.70 86 620 1200 10 KIA 3 K 10 1.10 85 3500 140 15 KIA 3 K 15 1.10 85 2400 250 20 KIA 3 K 20 1.10 85 1700 350 25 KIA 3 K 25 1.10 85 1400 470 10KIC 4 10 0.40 72 3700 100 15KIC 4 15 0.40 72 2470 150 20KIC 4 20 0.40 72 1850 200 25KIC 4 25 0.50 72 1480 280 Materials: Stainless Steel, Nickel, Hastelloy, Fecralloy, Monel, Double-phase Alloy,etc