HDPE Silicon Core Microduct Pipe Extrusion Machine; HDPE Duct Bundles Sheating Line

Microduct Bundles Sheating Extrusion line/Multi-duct bundled sheating process   Thick walled duct is designed for direct burial by having thicker inner tube. It has advantage for easy and fast termination with thin outer sheat. The thickness of each inner tube allows individual tubes to be used in direct buried solution. This item is suitable for any construction sites such as open cut, microtrenching, minitrenching and HDD. This product is usually recommended to the site which requires fast and easy sheath cutting during fibre branch off from FCP.   KAIDE machinery supply machines for producing this Thick Walled Duct with Bundle ways 2 to 24+1way. Inner duct diameter range: No. Inner Duct Diameter 1 7/3.5mm 2 10/6mm 3 12/8mm 4 14/10mm 5 16/12mm 6 16/13mm 7 18/14mm 8 20/16mm   Developing faster network have become the senstive factor in today's telecom industry. KAIDE's Tornado/ spiral ribbed microduct production line is designing for Tornado/ Spiral duct especially for faster cable blowing according customer's requirement.   The radical design of Tornado/ spiral ribbed ducts creats an air cushion cornado effect, imparting an increased pulling force on cables. The cable outings on the air cushion and does not touch the duct, the friction force is significantly reduced and also lesser pulling force is needed than in manual cable installation. This enables about double times longer cable blowing per operation, compared to conventional  smooth-wall ducts. Besides, minimizing cable installation cost, it ensures a faster return on investment.     The microduct silicon core tube production line informations: Line Model Screw Diameter L/D Production Speed Nominal Power L*W*H KDJS-60 60mm 36:1 30m/min 109KW 38m*4.5m*2.5m KDJS-65 65mm 33:1 20m/min 76KW 38m*4.5m*2.5m Wechat:0086-15169542387