Addition Cure Silicone Rubber For Encapsulation And Potting

Name : Addition cure silicone rubber for encapsulation and potting     Usage of Addition cure silicone rubber for encapsulation and potting : Filling for LED,LCD electronic display,circuit board.   Applications of Addition cure silicone rubber for encapsulation and potting : it is applicable to sealing, bonding ,coating for electronic parts.   HY-9300 is two-component addition cure silicone rubber which can be divided int a transparent type and a flame resistant product,which can be valcanized under room temperature or moderate temperature with low viscosity,easy mixing and pouring,is applicable to bulk pouring with excellent electrical performance.   Features of Addition cure silicone rubber for encapsulation and potting : the product has low shrinkage and non-corrosive,the silicone rubber can be used for long period at the temperature of -60---200 degree celsius with the characteristics of moisture-proof and waterproof,radiation-proof as well as weatherable and anti-ageing. (note:valcanizing under the room temperature or heat curing according to different requirements.)   Using instruction of Addition cure silicone rubber for encapsulation and potting : 1.mix the component A and component B evenly according to the proportion and can be used after deaired. 2.the vulcanizing time depends on the temperature in case of heat curing is required,the higher the temperature,the shorter the valcanizing time,and the thicker the product,the longer the time. 3.the flame resistant type silicone may produce deposit after long-time placement,mix the component A and component B respectively and evenly according to the proportion before using. Standard Datasheet of Addition cure silicone rubber for encapsulation and potting Model HY-9300 Type Gelatin Component A B Appearance(liquid) Black Transparent Mixing ratio(%) 1 1 Viscosity (Pa.s) 2.5±0.5 Pot life in 25°C(min) 300 Curing time in 80°C(min) 30 Hardness (Shore A°) 0 Dielectric strength (kv/m-1) ≥25 Elongation at break (%) - Volume resistivity (Ω) ≥1.0 1015 Dielectric constant (1.2MHz) 3.0 Temperature resistance (°C) -60~200 Flame retardant UL94-V1 Need any help on silicone rubber, please feel free to contact Miss Skye: QQ: 2355542564 Mob/whatsapp: +8618938867572 Website: Address: Building A, No.3, Hongling First Road, Liulian Shibi, Pingdi Street, Longgang District,Shenzhen, Guangdong, China zip:518117 Free sample is available for your test.