3/8 Inch By 35 Feet Spring Driven Extension Cable Reel For Air/Water Premium Duty Spring Retractable Hose Reel

JARCH 3/8 Inch by 35 Feet Spring Driven Extension cable Reel for Air/Water Premium Duty Spring Retractable Hose Reel Product Description   General Air Hose Reels--Premium Duty Spring Retractable Hose Reel   JARCH's Series 5000 reels are durable and compact for a wide range of applications with critical space requirements. A full flow shaft and swivel assures maximum product delivery. Reel Specifications and Dimensions   JARCH 3/8 Inch by 35 Feet Spring Driven Extension cable Reel for Air/Water Premium Duty Spring Retractable Hose Reel Benefits ***Full flow stress free swivel design - The full flow swivel combines the highest grade seal design and materials with bearing areas to insure maximum service life. The hose is plumbed into the base to eliminate the risk of undue stress on the swivel.   ***Reinforced steel - The steel guide arm and dual pedestal base are stamped with ribs and gussets and robotically welded to insure maximum strength and lightest possible weight. The unitized cast fluid path and ratchet reduce wearable parts and ease of assembly.   ***Quiet speed latch - The latch cam is designed for reliable quiet operation.   ***Long life drive spring - The unitized cast aluminum fluid path with built in declutching arbor virtually eliminates possibility of leakage and spring damage due to reverse winding. Only the highest quality spring steel is used and conditioned to insure there are no imperfections offering maximum service life. Product Effects JARCH 3/8 Inch by 35 Feet Spring Driven Extension cable Reel for Air/Water Premium Duty Spring Retractable Hose Reel Quiet speed latch mechanism Full flow shaft and swivel Multi-positional guide arm Baked-on powder coat paint Made from heavy gauge industrial steel Rotational Views Installation CAUTION Be sure reel base is securely grounded to mounting surface. Check for continuity following installation. On painted surfaces, remove paint at bolt location, use external tooth lockwashers or run ground wire from reel base to grounded object. Failure to ground will prevent reel from performing its intended function and could result in personal injury. Mount reel to grounded, metal surface using four holes in mounting base. To minimize wear on cable and cable guide, reel should be mounted in direct line with work so that cable is pulled out as straight as possible during use. See figures 1 & 2. Application Jarch main products: 1. Fiber optic rotary joint series 2. Through bore slip ring series 3. Electro optical slip ring series 4. Hybrid slip ring series 5. Pneumatic rotary joint series 6. Hydraulic rotary union series 7. Capsule slip ring series 8. Pancake slip ring series 9. High current slip ring seriels 10.High speed slip ring series 11.Thermocouple slip ring series 12.Miniature slip ring series 13.Wind turbine slip ring series 14.Ethernet slip ring series 15.Explosion proof slip ring series 16.Mercury slip ring series   Packaging & Shipping   Packaging Details: Standard Export carton Package Delivery Details: Delivery time for Sample: 3 days / Delivery time for Order depends on quantity Shipping:BY DHL, FedEx, UPS or TNT......     FAQ 1.How do I increase or reduce spring tension?   To increase spring tension: Adding wraps of hose will increase spring tension. This can be accomplished by pulling out approximately 10 feet of hose, hand feed hose back up through roller bracket assembly* until loop is large enough to slip over sheave. Add two or three wraps until desired tension is achieved. Do not exceed spring capacity. To reduce spring tension: This can be accomplished by removing wraps of hose from the reel sheave. Remove wraps of hose from the sheave, one wrap at a time, until desired tension is obtained. *For Series D9000 reels, you will have to remove the bumper and control handle then feed end of hose through roller bracket assembly to add or remove wraps of hose from the reel drum. 2.How do I install a new drive spring and set pre-turns? We have several different types of spring driven reels. Each require a slightly different set of instructions. For "How-To" instructions on replacing a drive spring please have your reel model or drive spring number available and consult customer service for instructions. For how many wraps of "pre-tension" to put on the reel, please reference the chart below. Spring Number Wraps Required S400030 18 S404230 13 S504240 19 S505740 13 S503755 21 S600050 21 S600625 13 S600620 19 S504230 17 602718-80 33 602720-100 27 602720-70 25 602721-80 21 602733 33 3.Can my spring driven reel be made "constant tension"? While most JARCH spring retractable reels can be made "constant tension" at the factory or by simply removing the latching system there are some models that may not have this capability. Please contact Reelcraft Customer Service to assure that the specific reel you have or require is capable of or available as a "constant tension" model. 4.Material leaking from swivel O-ring worn out or wrong O-ring for material being handled Replace O-rings with O-ring kit or replace with correct rings for material being handled. Swivel maybe loose or not enough pipe thread sealant on shaft threads Replace O-rings with O-ring kit or replace with correct rings for material being handled. Contact Us If you have any questions, pls contact us without any hesitation.