Medium Intensity Obstruction Light For Wind Turbines

Model:CM-13 Operating Voltage:AC90-260V Power consumption:≤10W Flashing frequency:20～60 times/min Light intensity:＞2000cd(Red) Life span:＞100,000 hours Emitting color:Red Beam angle:360° horizontal,more than 3° vertical beam spread Method of synchronization:Same power supply voltage signal mode Overall size(mm):∅210mm×140mm Ingress protection:IP65 Lightning protection level:10KA Optical Sensitivity:100Lux Operating temperature:-40℃～55℃ Net weight:7KG Wind load:80m/sec. Specification: Item Parameter Operating voltage AC220V Power consumption ≤10W Flashing frequency 20～60times/min. Light intensity 2000cd（±25%） Light source Red LED Lifespan ＞100,000 hours Emitting color Red Beam angle 360° horizontal beam angle ≥3° vertical beam spread Method of synchronization Same power supply voltage signal mode Overall size(mm) Ф210mm×140MM Installation size(mm) 126mm*126mm-4*M10 Ingress protection IP55 Lightning protection level 10KA Photocell sensitivity 100Lux Ambient humidity ≤95% Ambient temperature -40℃～55℃ Net weight 2.5kg Wind load 80m/sec.                                                 Application. Widely used in various fields of the Air Force, civilian airports and obstacle free airspace, helipads, iron tower, chimney, ports, wind power plants, bridge and city high-rise buildings where require aviation warning. Usually used above 45m and less than 150m buildings, could use alone, also could use with Medium OBL type B and Low intensity OBL type B together Features: l   Cover of the light adopts PC with anti-UV which is high efficiency light transmission up to 90%, quite high impact resistance and fit the bad environment very well;  l     House of the light is made of aluminum alloy and painted by spraying plastics, the structure is high strength, resistance to corrosion; l    Use the special optical reflector design, the visual range further, angle more accurate, no light pollution. l   Light source adopts import high quality LED, lifespan up to 100,000 hours, low power consumption, energy efficiency and environment protection. l   Based on the single chip computer control, automatic identification sync signal, do not distinguish the main light and auxiliary light, and also could be controlled by controller. l   Same power supply voltage with synchronous signal, integrate in power supply cable, eliminate the damage by error installation caused. l   Used the photosensitive probe fit for the natural light spectrum curve, automatic control light intensity level. l   The circuit of the light has surge protection, so that the light is suitable to harsh environment l   Integral structure, protection lever of IP65 l   GPS synchronizing function is available