Aviation Obstruction Light Controller

Model:CM-DKN Operating voltage:AC90-260V/DC48V Power consumption:≤20W Load capacity:≤4000W Flashing requency:20-60 times/min Number of control auxiliary lights:200 units Ingress protection:IP43 Controlled environment brightness:50-500lux Altitude:≤4500m Overall Size(mm):500mm*400mm*150mm Installation Size:430mm*330mm*4-M6 Specification: Item Parameter Model CM-DKN Operating voltage AC220V/DC48V Power consumption ≤20W Load capacity ≤4000W Flashing frequency 20～60 times Number of control auxiliary light 200 units Ingress protection IP43 Controlled environment brightness 50～500Lux Optical probe CM-012GK Operating temperature -55℃～55℃ Altitude ≤4500m Wind load 80m/sec. Net weight 6kg Overall size(mm) 400mm×300mm×200mm Installation size(mm) 350mm×240mm×M6                                     Application. For the CM-DKM aviation obstruction indoor’s controller is fit for our company’s all series aviation obstruction’s sychronization flashing work and monitor the light’s working state. This product is a indoor’s type, the waterproof grade is IP43, could use for the indoor’s enviroment directly. Features: • Use the steel shell and spray coating techniques, resistance to corrosion, anti-UV • The voltage of the power circuit and signal control line is same, so the connection of the wires are simple and reliability, it will not cause damage to the lightings and controller when connect the error line shortly. • Control circuit use the MCU control, can simultaneously control 4000W load power / within 200 units aviation obstacle lights synchronized flashing or steady. • Controller have 3 kinds operating modes: automatic, manual, close         Automatic mode: automatically shutdown during the day, turn off the aviation light control output; automatically turn on at night an open aviation light control output.         Work in manual mode: work status is forced open         Work close mode: work status is forced closed, three operating modes can be switched by the user . • The controller can also customize the fault alarm function, when one of the light it controlled failed, the indicator on the controller can be shown, also could ues the dry contacts to alarm the external enviroment. • The function of this aviation obstruction light controller is very powerful, performance is reliable and safe. Use and maintenance is simple and convenient; and with anti-surge device (anti-lightning In15KA /5 times, Imax 40KA), can be applied to a poor working environment.