Great Planes 1.60-50cc Reactor ARF GPMA1420

 Features:         Made of laser cut balsa and plywood with a foam sheeted turtle deck         Two-piece wings that bolt-on with aluminum joiner tube         TopFlite MonoKote covering         Pre bent aluminum landing gear, 0.16" (4mm) thick         Main wheels, 3.5" (88mm) diameter foam, tailwheel, 1" (25.4mm) rubber         Radio compartment's hatch removes easily with four bolts         Aluminum spinner, 3.25" (82.5mm) diameter         Painted fiberglass cowl         Painted fiberglass wheel pants         Clear molded plastic canopy         Dual servo aileron control         Dual servo elevator control         Approximately 24oz (720cc) fuel tank for glow fuel, must purchase gasoline conversion kit and tubing if using gasoline engine         Two piece composite engine mount         Full set of hardware is provided, IMAA legal         Assembly Time: Only 15-20 hours         Warranty Period (through the manufacturer): Great Planes guarantees this kit free from defects in both material and workmanship at the date of purchase.     spec :     Wingspan: 84.5" (2140mm)     Wing Area: 1556 sq in (100.4 sq dm)     Weight: 14 - 17 lb (6.35 -7.71 kg) depending on power setup selected     Length: 85" (2160mm)     Airfoil: Fully symmetrical     Center of Gravity: 7" (178mm) from the leading edge of the root wing rib     Control Throws     Low     Elevator: 1" (25mm) 10 degrees     Rudder: 2-3/4" (70mm) 16 degrees     Ailerons: 1-1/2" (38mm) 11 degrees     High     Elevator: 1-1/2" (38mm) 15 degrees     Rudder: 4-3/4" (121mm) 28 degrees     Ailerons: 2-1/2" (64mm)  19 degrees     3D     Elevator: 3-1/4" (83mm) 34 degrees     Rudder: 5-3/4" (146mm) 35 degrees     Ailerons: 4-1/2" (114mm) 36 degrees For more information, please visit our official website store at