Polymeric Strip Fasten FS

FASTEN® FS Product Description GECO FASTEN® is a polymeric reinforcing strip which used in MSE walls in civil engineering works such as road, harbor, and bridges. FASTEN®’s components are high tenacity polyester fiber tendons encased in a polyethylene (LDPE) sheath coating which increases the durability of fiber tendons from physical and chemical damages. FASTEN® reinforces frictional force and stability in soil, the connection strength between facing panel and back panel. Easy installation, 120 years of durability and cost matters ensure FASTEN® competitiveness. FASTEN® FS is the basic type of strip which is suitable for most of the site conditions. FASTEN® FS20 FASTEN® FS30 FASTEN® FS50 FASTEN® FS70 FASTEN® FS100 Physical Properties FASTEN® Type kN 20 30 50 70 100 120 ± 10% 150 ± 10% 200 ± 10% 260 ± 10% 340 ± 10% 85 ± 3 90 ± 3 90 ± 3 90 ± 3 90 ± 3 1.8 ± 0.3 2.0 ± 0.3 2.5 ± 0.3 3.0 ± 0.3 4.0 ± 0.3 Weight g/mr Width ASTM D4774/ EN ISO 9863 mm Thickness ASTM D5199 /EN ISO 9863 mm Core Material PET Body Material PE Mechanical Properties Tensile Strength ASTM D4595 /EN ISO 10319 kN >20 >30 >50 >70 >100 Elongation ASTM D4595 /EN ISO 10319 % >11 Creep Reduction Factor RFCR=100% of UTS RFCR < 1.47 at 120 Years Packing Details Roll Length m >100 Rolls per Pallet Roll Upon Request Pallets per container Pallet Upon Request The given values are indicative and correspond to average results. The results are based on our laboratory and certified testing institutes. 10% of Mechanical properties results can be varied, due to standard deviation. Products are subject to continuous development and improvement and these values may change over time. For any inquiries regarding technical consultant please contact technical department by e-mail: