Titanium Pipe

Titanium & Titanium Alloy Tube Specification Welded Tube: Φ(10-1050) x (6-30) x L Seamless Tube: Φ(3-117) x (0.2-6) x L≤6000mm Model Gr1, Gr2, Gr3, Gr5, Gr7, Gr12 etc. TA1, TA2, TA3, TA9, TA10, TC4 Standard GB/T3524, GB/T26057, GB/T26058, ASTM B337, ASTM B338 Status Annealing status (M), Hot Extrusion status (R) Remark Can provide all kinds of Titanium tube according to clients requirement Product detail:  Titanium Tube can be divided into welded tube & seamless tube. Seamless tube is suitable for  variety field using Titanium and titanium seamless tube produced by extrusion. It is also used for industrial titanium & titanium seamless tube produced by cold pressing.   Titanium and Titanium alloy Room Temperature mechanical properties     Model Status Tensile Strength   Rm/Mpa Specified non-proportional extension Strength Rp0.2/Mpa Break Elongation A/%,≥   Welded Tube (GB/T26057-2010) TA1 M (Annealing status) ≥240 140-310 ≥24 TA2 ≥400 275-450 ≥20 TA3 ≥500 380-550 ≥18 TA9 ≥400 275-450 ≥20 TA10 ≥483 ≥345 ≥18 Seamless Tube (GB/T3624-2010) TA1 M (Annealing status) ≥240 140-310 ≥24 TA2 ≥400 275-450 ≥20 TA3 ≥500 380-550 ≥18 TA9 ≥400 275-450 ≥20 TA10 ≥460 ≥300 ≥18 Seamless Tube (GB/T26058-2010) TA1 M (Annealing status) ≥240 -- ≥24 TA2 ≥400 -- ≥20 TA3 ≥450 -- ≥18 TA9 ≥400 -- ≥20 TA10 ≥485 -- ≥18 Titanium & Titanium Tube External Diameter & Permissible Variation Type External Diameter Permissible Variation External Diameter Permissible Variation Welded Tube ±0.30mm Seamless Tube (GB/T3624-2010) 3-10 ±0.15 >50-80 ±0.65 >10-30 ±0.30 >80-100 ±0.75 >30-50 ±0.50 >100 ±0.85 Seamless Tube (GB/T26058-2010) 25-70 ±1.0 >150-170 ±2.5 >70-100 ±1.2 >170-200 ±3.0 >100-120 ±1.5 >200-210 ±3.5 >120-150 ±2.0     Titanium & Titanium Tube Wall thickness Permissible Variation Type Wall Thickness Permissible Variation Wall Thickness Permissible Variation Welded Tube Standard Tube Wall ±10% Seamless Tube (GB/T3624-2010) Standard Tube Wall ±12.5% Seamless Tube (GB/T26058-2010) 4,5,6 +1.5/-1.0 12,15,18,20 +2.5/-1.5 7,8,9,10 +2.0/-1.0 22,25,28,30 +3.0/-2.0     Titanium & Titanium Alloy Tube Material Cut Type External Diameter Material Cut , Not More Than Welded Tube >10-30 2 >30-38 3 Seamless Tube (GB/T3624-2010) ≤30 2 >30-60 3 >60-110 4 Seamless Tube (GB/T26058-2010) 25-50 3 >50-100 4 >100-210 5