622M/155/M SDH EQUIPMENT Support 4*ETH+16E1/FXO,FXS ADM TM

PT-60 1001 GE SDH Equipment Brief Introduction PT-60 1001 is Intelligence gathering type bridge base on the large capacity Ethernet line access requirements, It can achieve 63groups E1 to Ethernet converge. It’s newly-developed optical fiber transmission equipment by Photel company based on SDH technology. It can design as a STM-1/STM-4 level optical terminal with two 155Mb/s or 622Mbit/s optical interfaces to provide an ultra-compact, cost-effective and flexible multi-service platform. PT-60 1001 can be used not only as a­ add-drop multiplexer (ADM), but also as a termination multiplexer(TM). The equipment is standard 19 inch 1U height. Features * 1U-height compact-size design. * Provides 256×256 VC12 level ,12×12 VC4 level non-blocking cross connection, supports flexible add/drop business, bi-directional and broadcasting capacity. * Provides sub-network connection protection, 1+1 redundancy protection, etc. * Provides variety of network configurations: point-to-point, link and multi-ring. * Provides E1, 10M/100/1000M business interfaces. * Provides up to 16 E1 interfaces; 4×10/100/1000 BASE-T Ethernet interfaces; 2 STM-1 optical interfaces or 2 STM-4 optical interfaces, up to 16 channels FXO/FXS/4WEM. . * Allows configuring STM-1 system to/from STM-4 system only by replacing interface modules; simply upgrading. * Provides order wire interface (2-wire interface), with the functions of group calling and selected calling. * Provides timing synchronization interface. Provides STM-1 and STM-4 line-rate timing source. Supports the SSM function. * Provides DCC channel of D1 to D3;Using TCP/IP communication protocol. * Provides F (Ethernet), f (RS232) network management interfaces for configuration, alarm, performance, maintenance and security functions of ITU-T definition. * Provides equipment software download, with the ability of software remote upgrade. * Supports online upgrade function. * Provides access to remote modem network management, supports remote monitoring. * Supports Super Long-distance (≤80Km), Long-distance(≤50Km), Short distance (≤30Km)fiber transmission. * Provides fans to disperse heat forcibly, or allows natural heat dispersion without using fans as well; provides the fans controlling temperature and inspecting their own status to guarantee the equipment running stably. * Flexible structure designing: allows the front access or the rear access by the method of mounting shelves. Technical Specification * Ethernet interface Comply with IEEE 802.3 relative standards. Reference GB YD/T 1061-2000. Ensure the point to point transparent transmission of Ethernet business, including ---transparent transmission of Ethernet MAC frame and VLAN tag. * E1 interface Bit rate(Kb/s):2048 Bit rate error tolerance: ±50ppm Code type:HDB3 * Order wire telephone Signaling mode: dual tone multi frequency mode (DTMF) Signal tone * Frequency: 450Hz * Dial tone: Long legato * Ring back tone: 1second on, 4 seconds off * Busy tone: 0.4 second interruption Ringing mode: Buzzer sounds Ringing tone: Same with the ring back tone * Power supply Input voltage: Standard value -48VDC and 220VAC Voltage range: -36VDC ~ -72VDC, 176VAC ~ 264VAC Power consumption: ≤50w * Working environment Working temperature: -10°C ~ +50°C Working humidity: ≤90% (no condensation) Application Company Information We have been the professional manufactuer of PDH, PCM ,SDH,PBX etc.communication equipment for more than 15 years. 1.We provide OEM and ODM service. 2.We provide peoducts for military 3.We acceppt customer Oriented Equipment 4. Photel productsenjoy high quality and competitive price! Welcome to Photel Certifications   PCB soldering process   Exhibition Products show   Our Services ♦Payment 1.T/T by bank is our preferable payment method. 2.We also accept different payments,such as L/C, Western Union or as your demand. 3.We will send you our bank information in the PI, please note. ♦Shipment 1.Lead time based on our strong production capacity,normally one product can be ready within 1-3 days, if the quantity of the order is more than 500pcs,maybe we need a little more time. 2.Big order could be by sea or air. 3.We will send you in 3-5days after the full payment has been confirmed. 4.please provide your information:contact person name,company name,address,post code and telephone number in the PI. ♦Warranty 1.All products have been checked and packed in good condition after our serious QC test. If you have any question, please feel free to contact us, we would get it solved in limited time and our service would make you trust us. 2.Our equipment provide two years warranty, after two years you can renew the warranty. ♦Feedback 1.Hope we can have a long term cooperation. 2.We answer all your inquiries in 8hours or less guaranted,if you have any question about communication product please contact us. 3.If need our technical section will design solution for you. 4.We own the best after-sale service, our team will do our best to solve for customer when have any problem happen. ♦Contact us SKYPE:+8617712860139