1/4/8 E1 TDM OVER IP(support PATH DELAY VALUE)

PT-10 100X TDM OVER IP Serial Equipment Brief Introduction PT-10 100X TDM OVER IP Equipment will transmit E1 signal through IP channel, the IP channel can be the existing wired Ethernet channel or wireless Ethernet bridge channel. IP encapsulation adopts UDP format, which supports inner transmission in Ethernet network, and also supports route exchange transmission among network segments. The transmitted E1 can be framed or un-framed format, the E1 interface of the same TDM over IP equipment can be connected with the different remote TDM over IP equipment. Features * Providing up to 8E1 interfaces; * Providing 4ETH interfaces, herein 2ETH interfaces are uplink interfaces, and the other 2ETH interfaces are downlink service interfaces; * Providing Optical ETH uplink interface; * Having the high transmission efficiency, and the transmission delay can be adjusted; * Supporting point to point, point to multi-point transmission; * Supporting E1 framed, unframed setting; * Supporting E1 loss alarm indication; * Adopting UDP encapsulation, and supporting different types of Ethernet transmission channels; * Supporting Ethernet PING package function; * Ethernet supports 10/100M self-adaptive,half/full duplex self-adaptive; * Supporting E1 package QOS assurance; * The equipment firmware and software supports remote update function; * Dual power protection, support AC220V or DC-48V(optional). Equipment Models Model E1 Number PT-10 1001 1 PT-10 1002 2 PT-10 1004 4 PT-10 1008 8 Technical Specification * Ethernet complies with IEEE 802.3 related recommendations, supports 10/100M self-adaptive, half/full duplex self-adaptive; * E1 interface complies with ITU-T G.703 suggestions, the impedance is 75Ω, it adopts Q9 connector; * NMS port is ETH port or RS232 port, when adopting ETH NMS mode, it can manage any equipment inside the network; * Power consumption: Less than 10W * Working temperature: -10°C to 50°C, humidity≤90%(non-condensation) * Dimensions: 440mm(L)×170mm(W)×44mm(H). Application 1.Point to point network 2.Point to multipoint network Company Information We have been the professional manufactuer of PDH, PCM ,SDH,PBX etc.communication equipment for more than 15 years. 1.We provide OEM and ODM service. 2.We provide peoducts for military 3.We acceppt customer Oriented Equipment 4. Photel productsenjoy high quality and competitive price! Welcome to Photel Certifications   PCB soldering process   Exhibition Products show   Our Services ♦Payment 1.T/T by bank is our preferable payment method. 2.We also accept different payments,such as L/C, Western Union or as your demand. 3.We will send you our bank information in the PI, please note. ♦Shipment 1.Lead time based on our strong production capacity,normally one product can be ready within 1-3 days, if the quantity of the order is more than 500pcs,maybe we need a little more time. 2.Big order could be by sea or air. 3.We will send you in 3-5days after the full payment has been confirmed. 4.please provide your information:contact person name,company name,address,post code and telephone number in the PI. ♦Warranty 1.All products have been checked and packed in good condition after our serious QC test. If you have any question, please feel free to contact us, we would get it solved in limited time and our service would make you trust us. 2.Our equipment provide two years warranty, after two years you can renew the warranty. ♦Feedback 1.Hope we can have a long term cooperation. 2.We answer all your inquiries in 8hours or less guaranted,if you have any question about communication product please contact us. 3.If need our technical section will design solution for you. 4.We own the best after-sale service, our team will do our best to solve for customer when have any problem happen. ♦Contact us SKYPE:+8617712860139