VACUUM BRAZED DIAMOND CORE DRILL BITS

"FEATURES of Vacuum Brazed Diamond Core Drill Bits ★-The range of Vacuum Brazed diamond drill bits are recommended for drilling of all types of ceramic tiles, especially porcelain tiles, and other wall materials such as marble and granite. ★ Used VACUUM BRAZED technology, which increases resistance to temperature and friction, to fix the diamond particles in the cutting area. ★ Vacuum Brazed Diamond Drill Bits, diameters 6mm to 13mm. they are perfect for installing bathroom accessories or any type of decoration accessory on ceramic surfaces. Other diameters range from 19mm to 76mm., they are mainly designed for the ceramic tile installer to get the best results when performing the necessary drilling for water tapping points, sewers, electrical connections, etc. ★ GREETOOLS diamond drill bits are for dry cutting and can be used, thanks to their connection with a M14 thread, directly with a grinder or non-percussive power drill, by using the drill adaptor. ★The average life of the GREETOOLS Diamond drill bits varies according to the diameter. In diameters of 6mm to 13mm. the average life is 25 holes and from 19mm to 76mm. the average life is 45 holes. ★-The average life of the drill bits ALWAYS depends on the type of material, its thickness and proper cooling and use. ★ The drilling depth of GREETOOLS Diamond drill bits is 35mm (1-3/8”) ★ In diameters of under 20mm, GREETOOLS Diamond tools contain wax inside. This wax melts while using the drill bit and facilitates cooling and the evacuation of drilling remains (if the wax runs out, the drill bit can continue working. Only the total loss of the diamond indicates the end of the life of the drill bit). ★ The Diamond drill bits (diameters 30mm.) have a lateral opening which improves the cooling of the drill and facilitates the removal of solid residues after each drilling. Before further drilling you must ensure that the drill bit is clean and free of any obstruction. ★ The maximum speed of use for GREETOOLS diamond drill bits is 14000 rpm For a better finish and longer duration of the drill bit, it is important to respect the correct rotation speed and only make a slight orbital movement during drilling. REMARKS As always at Greetools we advise the use of purpose built tools for DIY use. Safety must always come first , Wear the appropriate safety equipment, gloves, dust masks and eye protection. "