OT7300 Single IC Chip Super Speed USB 3.0 Host To Host Bridging Controller

OT7300 single IC chip Super Speed USB 3.0 Host to Host bridging controller The OT7300 is a single-chip SuperSpeed USB 3.0 Host-to-Host bridge controller specially designed for connecting two USB Host systems either between Desktop/Laptop PC, Tablet, Smartphone, or Smart TV. The OT7300 uses 'Hybrid Multi-Class' channel that allows two USB host systems to share their keyboard, mouse, network, mass storage, display, and multimedia capabilities. The OT7300 links two USB hosts to exchange data through mass storage class driver or RNDIS (Remote Network Driver Interface Spec) Both USB sides support USB mass storage mode that allows the host system automatically launching the custom application which stored in external flash memory. The OT7300 also provides flexible endpoint assignment mechanism to easily support multi-USB class protocol. Custom applications can be easily implemented through this high performance controller.  Features MCU   Enhanced 1T 8032 MCU   MCU can be operated at 30MHz and 60MHz Communication Interfaces   Two USB 3.0 SuperSpeed receivers -Support 5Gbps/480Mbps/12Mbps -Support up to 16 endpoints -Support Control/Interrupt/Bulk/Isochronous endpoint   One eMMC reader I/F   One Full-duplex UART ports   One Four-wire SPI module in Master mode   One I2C modules in Master or Slave mode Input/ Output/Analog feature   Up to 16 GPIO(General Purpose I/O)   Two Pulse-Width Modulation (PWM) in generate mode Timer System   Three 16bit Timers/Counters Clock Management   Configurable PLLs   Independent Watchdog timer   30MHz Crystal Source Power Management   5V and 1.2V power supply   3.3V Digital I/O pad   Built-in 5V to 3V LDO   Embedded Power On Reset Protocol and Driver   USB Audio Device Class   USB Human Interface Device Class(HID)   USB Mass Storage Class   RNDIS(Remote Network Driver Interface Spec)   Self-definition Applications   USB KVM Switch   USB Data Transfer Cable   Custom USB Host to Host Application