Paint Pail Weighing Filler/ Liquid Fertilization Pail Weighing Filling Machine/ Barrelled Pigment Weighing Filling Machine

Automatic barrel quantative Weighing liquid filling machine for lubricating oic, antifreeze, hydraulic oil, painting, laundry detergent, liquid detergent, liquid fertilizer, etc. 1. Brief instruction This barrel weighing liquid filling machine is suitable for all kinds of liquid weighing 0.5- 30 kg or 15-100 kg, especially for sticky and non sticky, corrosive and non corrosive liquid medium or large size barrel filling, such as water-based paint, laundry detergent, liquid detergent, food additives, pure water, etc. So it’s Widely used in food, oil, paint, latex paint, construction paint and other chemical fields. 2. Opetation steps 1.connect the store tank discharging mouth with feeding inlet of the filling machine (this machine is equipped with metal hose and clamp) 2.insert the trachea of air compressor into the tracheal joint of the machine 3. connect power 220 v 4. set the filling weight according to the operating instructions NOTES: 1. The size of standard filling head is 1 inch, suitable for 0.5-30 kg a barrel , if you want to fill more than 15 kg large-sized barrel, just need to replace a bigger filling head to increase the filling speed,. If the barrel mouth is not big enough, there is always appropriate conversion connector to match. 2. The capping machine is an important part of the production line, to ensure the lid is flat and tight. The heavy barrel locates directly under the pressure plate , after positioning, pedaled the gland foot switch to cap the barrel. 3. The size of standard filling head is 1 inch, suitable for 0.5-30 kg a barrel , if you want to fill more than 15 kg large-sized barrel, just need to replace a bigger filling head to increase the filling speed,. If the barrel mouth is not big enough, there is always appropriate conversion connector to match. 4. The capping machine is an important part of the production line, to ensure the lid is flat and tight. The heavy barrel locates directly under the pressure plate , after positioning, pedaled the gland foot switch to cap the barrel. 3. Features and advantages 1. Simple installation, filling volume can be freely adjusted from 0.5 to 100kg. 2. Parts contacting materials using stainless steel 304, joint seals using four fluorine or silicone. 3. The height of filling head can be adjusted freely within 600mm, suitable for different scale barrel filling. 4. Having Automatic filling induction, manual filling and error compensation function. 5. Light will display when filling finished. 6. Automatic controlling the power of valve switch to control the filling accuracy. 4. Technical parameters Filling speed 3-7barrels/min Filling volume 0.5-100 Kg Filling accuracy ≤0.2% Applied barrel mouth ≥20mm (40mm is standard) Applied barrel Height ≤600mm(customized model can adapt to different barrel height Voltage 220V/50HZ Power 0.3kw Weight 190 kg Division value 0.01kg Compressed air 0.3-0.6MPa Work temperature -10­­—+45? Relative humidity ≤90% Dimension (mm) 550*630*1200(L*W*H) 5. Detailed photos 6. Final products 7. Shippment and delivery If you are just looing for this barrel weighing liquid filling machine, please feel free to contact me for more details.