Good Quality Groove Type Wood/tree/log Skin Removing Machine

Automatic single and double roller Groove wood peeling machine/ wood log debarker/ wood debarking machine 1. Brief Instruction of wood debarker Groove wood peeling machine is widely used in large, medium and small paper mills, pulp mill, wood factory, timber yard, timber processing plants, man-made board factory ,such as plywood factory, medium density fiberboard factory, etc. 2. Working Principle of wood debarker 1. The wood bark stripper adopts open silo --wood stripper machine--wood is feeded from one side and discharged from the other side. 2. Due to the impact of gear teeth on wood, wood in the casing not only do circulating movement, but turn around their own aix, so stripping efficiency is high. Species of difficult stripping trees such as eucalyptus wood and poplar can be peeled off with high rate. 3. Strong adaptability of wood, can peel different tree species, diameter, length and shape of logs. Due to the logs for rotary movement and irregular beating, so bending logs voids can also contact with stripping teeth is very good. Therefore, the bending of log peeling net rate is much higher than other drum type machines. 4. Due to big casing is fixed, so there is little energy consumption, low failure rate, small maintenance workload, vibration and noise was much lower than the roller peeling machine, the machine can work once falling to the ground, even without the base installed, easy to use. 3. Technical Parameter of wood debarker Specification 6Meters (Single roller) 6Meters (Double roller) Capacity(t/h) 5-10 7-15 Power(kw) 7.5*2 7.5*2 Length(mm) 6300 6300 Width(mm) 1310 1310 Height(mm) 1550 1550 Weight(t) 3 4 4. Detailed Photos of wood debarker 5. Final Products 6. Shippment and Delivery If you are just looking for the wood peeling machine, please contact to me with no hesitation.