High Quality 75G/M2 Fiber Glass Drywall Tape

Production Description Self-adhesive fiberglass mesh tape(also called drywall joint tape) is made of fiberglass mesh that is coated with adhesive latex. It’s the most ideal material for cracks repairing on the drywall, and joints strengthening on the ceilings, gypsum boards, ect. Comparing to the paper tape which is widely used on the market, its much easier to use, no bubbles or blisters, and can be applied directly to the wall surface without pre-embedding required. Its tensile strength is up to 600N/50mm which is much stronger than paper tape. Furthermore, it’s mom-organic,mold-resistant,long durability, which prevents the possible break that happens to paper tape after 3-5 years.   Technical Data Sheet    Density 65±3g/m2 75±3g/m2   Raw Fabric 45g/m2 55g/m2 Glue Content 30%    30% Glue Type Adhesive latex Adhesive latex Moisture  ≦0.5%    ≦0.5%   Mesh size 8×8/inch 9×9/inch   Tensile strength ≧600N/50mm ≧600N/50mm   Specification   Roll width 50mm(2inch),100mm(4inch), 150mm(6inch),200mm (8inch) Roll length 20m(22y), 45m(50y), 90m(100y), 153m(168y) Available colors white, yellow Blue,green,red, ect. Diameter of paper core 50mm,75mm Application Drywall repairing, gypsum board jointing, cracks repairing     How to use Step 1: If the gap is bigger than 5 mm, it’s better to fill in the gap with compound before applying the tape. There are a lot of ready-to use and all purpose compound on the market, but quick-dry type is strongly recommended, otherwise it delays the project.   Step 2: Cover the gap or cracks with drywall tape and make sure it’s fully covered, then cut off  the tape.     Step 3: If the project is big, it’s recommended to use a tape gun which is much easier and faster to use with auto-cut.     Step 4: Make sure every seam is completed covered by self-adhesive tape, and apply a layer of compound to the surface and make sure the tape is fully covered.    Step 5: put the remaining tape into sealing bag to prevent drying out and prepare for future use.   Package Each self-adhesive fiberglass tape put into the shrink bag, and then put into carton or pallet. Business Term Payment 30% T/T deposit payment in advance, balance against copy of B/B, LC, ect Production Lead Time 15-25 working days after deposit General Shipping Methods Ocean Freight FOB Shipping Port Shenzhen Application Other payment term EXW/CIF/CNF could be possible,please contact us   Our Service (1): Our Company could offer you finished products, OEM accept. (2): We focus on long term relation with clients and offer good service after sale. (3): We focus meet your one-stop purchase requirement.