Lubricant Additive Gear Oil Additive Package T4202

General Gear Oil Additive Package T44202   (1) Introduction And Application ·This product has excellent performance of antioxidation, antirust, antiwear and bearing capacity. ·This product is suitable for all kinds of paraffin base, intermediate base, naphthenic base, hydrotreated and synthetic base oil when it modulates applied oil, with low dosage, good economic performance and applicability. ·The heavy load vehicle gear oil modulated by the adding amount of 4.2% of this product can meet the requirements of grade MIL-L-2105E (API GL-5). The medium load vehicle gear oil modulated by the adding amount of 2.1% of this product can meet the requirements of grade API GL-4. (2) Dosage Reference Quality Level Additive Dose（m %） GL-5 4.2 GL-4 2.1 Heavy Load 1.5 Medium Load 1.0 (3) Quality Index Item Quality Index Test Method  Density(20°C)kg/m3 Report GB/T1884 Flash Point(Open), °C Report GB/T3536  Water, %(m/m) ≤0.03 GB/T260  Mechanical Impurities, %(m/m) ≤0.03 GB/T511  S, %(m/m) ≥25.0 SH/T0303  P, %(m/m) ≥1.50 SH/T0296  N, %(m/m) ≥0.30 SH/T0224  Appearance Brown Transparent Liquid Visual (4) Storage According to the requirements of SH/T0164, the maximum temperature should not exceed 75°C for the storage,handling of the product and preparation of oil;for long-term storage. The maximum temperature should not exceed 45°C. The product is non-flammanle, non-explosice and non-corrosive.No special preventation measure is required during safety, environmental protection and use, it’s equal to general petroleum products. (5) Packing: 200Kg/Iron Drum (net weight).