Power Electonics Test Equipment Battery Capacity Analyzer

Battery Capacity Analyzer  Outline: In order to truly and accurately grasp the actual capacity of storage battery pack, according to the national standard, electric power and communication industry standard, we must carry out the full-capacity check discharge test for storage battery pack. In the discharge process, it carries on rated constant-current discharge (this value is corresponding with capacity, specifically refer to industry standards), and real-time measurement for each single battery's voltage. If the voltage of any one battery is lower than the rated value, it stops discharging. The capacity has been released is the actual capacity of battery pack, which can judge the storage battery performance (for more accurately calculating the actual battery capacity, it's suggested we do conversion according to environment temperature during testing). Characteristic: Adopt high efficiency, pure resistance load and linear current stabilization mode. High precision and fast speed of current stabilization, with current stabilization at the start of discharging, no impact, no ripple, environmental and no smell; Discharge current, discharge time and lower limit of discharge voltage protection are set freely. With rated constant-current discharge in the whole discharging process, no change; Automatic stop function: 1)the discharge time reaches the set value; the terminal voltage of battery pack is lower than the set value; the single cell voltage is lower than the set value (working with the wireless battery tester, which can automatically control the discharge start-up and stop); remote control the discharge start-up or stop; can manually quit discharging at any time; The parallel operation can satisfy the requirement of larger discharge current; Working with the wireless battery tester, it can automatically collect voltage of all the single cells in real time while discharging. When the voltage of any one battery is below the set value, it will terminate discharging automatically. Thus full-automation of the whole discharge process is perfectly realized; With "breakpoint to continue" function under "pause", "power off" other special circumstances; With many self-protection functions: reverse connection, wrong connection, under voltage, over voltage, undercurrent, over current, over temperature, fault of heat dissipation fan, etc; Use LCD display in English, menu type operation interface, display each data in real time, easy to operate; With a USB data communication port, the discharge data can be directly exported by U disk; Built-in large capacity FLASH memory, automatically save discharge data in real time, no lose when power down; Adopt dual power supply mode. The working power supply of the device is provided by the tested storage battery, without external power supply; Humanized design, operation, using and wiring are extremely simple and convenient! With the use of wireless storage battery inspection instrument, it only needs three wires, there are only three connections: discharge wire between the discharge instrument and battery pack (the positive and negative is one respectively), communication line between the discharge instrument and the wireless battery inspection instrument (one line); The instrument is small, light, and can be carried by one person; The instrument is equipped with simple and practical background analysis software, which can perform data check and analysis, report printing, automatically generate curves, histogram, data tables, etc. Excel format file can be exported, which is convenient for data processing and reporting. Technical Parameter: Type(optional) FLD-F 220/30 FLD-F 220/50 FLD-F 220/60 FLD-F 110/30 FLD-F 110/60 FLD-F 110/80 FLD-F 110/100 FLD-F 48/50 FLD-F 48/100 FLD-F 48/150 FLD-F 24/50 FLD-F 24/100 FLD-F 24/150 Applied Battery Pack 220V 110V 48V 24V Note: UPS storage battery and other special voltage grade of storage battery discharge instrument can be customized according to demands Discharge Current (single) 0-30A 0-50A 0-60A 0-30A 0-60A 0-80A 0-100A 0-50A 0-100A 0-150A 0-50A 0-100A 0-150A Current Spreading Meet the requirement for higher discharge current by machine's parallel operation Discharge Current Setting Pace 0.1A Precision of Current Stabilization ±0.5% Precision of Voltage Measurement ±0.5% Display Mode LCD Display in English Data Communication Interface USB (the test data can be exported through the U disk) Control Interface RS485 Data Storage Media Built-in FLASH memory, support power down storage Working Power Supply Dual Power Supply Modes:1)provided by the storage battery while connecting battery pack, no need external power supply;2)provided by AC electricity supply via power adapter while without battery pack. Backstage Software Support Operating System: Win2000/XP/7 Dimension(cm) Our Service: Intellectual Property and Certificate: Operation Photos: Application Industry: How to choose good battery discharge tester ? Usually meet necessary points as follows:  1. Must use PTC heating element to assure low failure rate. 2. Must use constant current discharge mode and can automatic count the battery capacity. 3. Discharge accuracy : ≤±0.5% , discharge current ripple coefficient : ≤±0.1% 4. End condition can choose battery voltage ,discharge current, continuous time and total capacity.   Contact Information ​