GS8208;DC12V Addressable Full Color RGB 5050 LED Light Source

General Descriptions The GS8208 is a 3-channel constant current LED drive with resumable data transfers and internal display patterns. There are three open-drain constant current outputs, with a build-in PWM of grayscale. The range of input power is from +9V to +15V, and voltage-endurance of LED port is +12V. There is a built-in 12bits GAMMA correction module. PWM maximum refresh frequency is 8kHz. The GS8208 use the e-RZ (extended return to zero code) as the signal transmission mode, which can control the output current channel by channel and cascade infinitely. GS8208 provides two-signal data input as redundant control, which ensures the transmission of the signal if any single chip damages. In the absence of signal input, GS8208 displays the built-in display patterns that is suitable for those applications without a controller. There is the built-in power-on and power-off protection in the drive, which can enhance the service life of the chip. It also has the automatic test function while power on, which is convenient for the customer to test. The GS8208 provides SOP8 packaging, working environment is from -40 ° C to + 85 ° C. Features ·12v operating supply voltage with 7805 module inside ·Default 17.5mA constant current output, the minimum is 11mA ·Use e-RZ code, serial data frequency 800kHz 8bits data transfer, 12bits build-in GAMMA correction of PWM display ·Built-in PWM technology, supports 8kHz PWM refresh rate ·With resumable data transfer function, single chip damage does not infect data transmission ·Built-in display pattern for the applications without a controller ·Built-in automatic test mode, power-on and power-off protection ·ESD:2kV working environment is from -40 ° C to + 85 ° C ·Packaging：SOP8 Applications ·LED Display ·LED lighting/light engineering GS8208 LED GS8208 LED