Quick Details
- Processing Time:-
- Port:-
- Supply Ability: -
- Brand Name:-
Fluid Bed Dryer offers a lucid solution to drying of wet granules, crystalline or coarse materials. It utilizes the principle of passing the hot air at a high velocity through
the bed of the material to be dried, thus causing it to fluidize.
The blower situated on the exhaust side of the dryer operates no negative pressure principle, which creates the induced draught and sucks in the fresh air into the dryer. A
stream of hot filtered air is introduced from the bottom of product container containing the wet material. This container is provided with the air distribution plate and Dutch
sieve. The air stream is passed through the bed of the material and fluidizes the product particles by creating the turbulence in the product container. Due to fluidization
each particle gets surrounded by hot air, which leads quick & uniform heating and drying. Filter bags provided at the top prevent escaping of particles from the machine.
FEATURES
In compliance with cGMP guidelines
Modular Design
Uniform Drying with reducing Drying time
Quick Dismantling of Dutch Sieve & Perforated Sheet at the Product container
Online Sampling Device (optional)
Fully Automatic Operation through Programmable
Logic Controller (optional)
Product Container with Stirrer (optional)
Flameproof Construction (optional)
# The blower motor of higher capacity will be required in machine if
supplied with HEPA, Scrubber & ducting length above 5 meters.
MODELS
CPMFBD15
CPMFBD30
CPMFBD60
CPMFBD120
CPMFBD200
CPMFBD300
CPMFBD400
CPMFBD500
CPMFBD 600
Container Gross Volume Ltr.
46
71
142
280
475
650
870
1055
1350
Max. Batch Capacity (0.5 bd) kg*
0 to 15
20 to 30
40 to 60
80 to 120
160 to 200
200 to 300
300 to 400
400 to 500
500 to 600
Blower Motor HP**
7.5
7.5
10
20
25
30
40
50
50
Air Flow (CFM)± 10 %
430
706
1060
1880
2590
3235
3825
4000
4705
Steam Pressure (kg/cm2)
3.5
Steam Consumption (kg/hr)
30
50
80
140
216
250
288
344
384
Electric Heater (kW)
18
20
36
60
N.A.
N.A.
N.A.
N.A.
N.A.
Compressed Air Pressure (bar)
8
Drying Temp (°C)
35-80
Electrical Supply**
415 V±10%, AC, 3 Ø, 50 Hz