CDMP High Quality Dust Collector / Bag House Filter / Dust Removing Machine

CMD pulse bag type dust collectorThe principle of CMD pulse bag type dust collector:1.Using efficient function of bag type dust collector dry dust, gas and dust will be filtered through the dust removal and recovery.2.The dust remover is composed of a casing, an ash bucket, ash discharging device, bracket, pulse cleaning system and electric control part.When the dust laden gas from the inlet into the dust collector, met at the middle inclined baffle air inlet, air is turned into the hopper, and the airflow speed slow, due to inertia, gas in coarse grain dust directly into ash hopper, play a role in the dust.3.Then the airflow into the hopper and folded upwards through the metal skeleton inside bag, dust trapped into the filter bag chamber gas purification in the upper part of the outer surface of the filter bag after the clean room, together out of the wind tube.With prolonging filtration time, gradually thickening dust resistance in the bag on the bag, the 4.resistance increases, then according to the given time interval or set limits for each resistance of the dust collecting chamber, take turns cleaning.5. Each lifting room is equipped with a lifting valve. When the ash is removed, the lifting valve is closed, and the filtered air flow through the dust collecting chamber is cut off. Then, the pulse valve is opened, and the high-pressure air is sprayed into the filter bag, and the dust on the outer surface of the filter bag is cleared.6. The pulse width and cleaning period of the dust collecting chamber are controlled by the electrical part. The dust collected by automatic ash discharging device for discharging hopper. Company Unique advantages/service Trial product: We have specialized laboratory for vacuum process casting, lost foam casting, foundry ladle and other products. Project design: We customize the suitable casting production line with the optimized design, the reasonable process, the cost effective investment and the cheapest operation cost. Pre-sale service: We make an active communication with customer, inquiring about the customer's product, output, workshop situation, production status, the requirements and ideas, providing perfect technology and business suggestions and designing the most reasonable production plan. Mid-sale service: At the same time of manufacturing equipment, technology training to related staffs is done. The training contains the technology operation, installation, debugging, explaining the work principles, structure, maintenance and other announcements to guarantee the customer can produce the soundness castings efficiently.