IP Grade Sand And Dust Test Chamber

Production description Lab Environment  IP Grade Sand and Dust Test Chamber is suitable for all mechanic,electric, electronoc, automoblie, motorcycle,automobile and other products and spare parts to do dustproof test . It is used to evaluate whether products can resistivity and storage, running or not in air of dry sand or dust. It is applied to IEC-529, GB4208-93, GB2423.37-89 and GJB150.12. For Dust Test Machne, large observation window with bright lights to keep the box, and use of tempered glass embedded heating element. Dust test chamber provides testing as per various iec 60529 for IP5x & IP6x, JIS, is, DOT mil standard, Combination of various testing cycles are available in a completely mono block construction. All settings can be done in an ergonomically designed control panel with accurate and uniform dust agitation. Chamber Design Features(Lab Environment  IP Grade Sand and Dust Test Chamber) 1. Chamber material:  Imported high grade stainless steel inner tank (SUS304) mirror panels, the exterior is made of power coated cold-rooled plate or  SS 304 stainless steel plate ,   increasing the appearance of the texture and cleanliness. 2.Equipment containing dust vertical circulation of air, dust can be reused for testing; Device itself has a good sealing performance, test, laboratory test can clearly observe the situation; Device equipped with a vacuum system to meet the needs test; Equipment dust the bottom of the device can be replaced. 3. Transparent window is convenient to observe specimen during testing. 4. Blow fan adopts stainless steel shell, high sealing and wing speed, low noise. 5. Inside the shell is the funnel type, vibration cycle can be adjusted, dust free float in the sky falling to blowing the hole together. Specifications and technical parameters Model LSCN-500 LSCN-1000 LSCN-1500 Internal Dim.W*H*D(mm) 800*800*800 1000*1000*1000 1000*1500*1000 Metal mesh dimension wire diameter is 50um, separation distance between wire 75um The dosage of talcum power 2 kg for each stere of test chamber volume (the use times are not allowed to exceed 20 times). The talcum power usage 2kg/m3 ~ 4kg/m3 Testing Temp. 20°C±15°C Testing humidity 45%RH~85%RH Material Exterior Cold rolled plate+Powder Coated or  SUS#304 Interior SUS#304 Controller Imported digital programmable touch screen controller Vacuum system Equipped with pressure gage, air filter, three pieces of pressure regulation,  and connection tube ,vacuum pump is optional Test time  0~999.9hr  settable Other Components Chamber lamp, Wiper, Casters with adjusters Power supply 3 phase 380V 60/50Hz Customization service Non-standard or special requirements are all welcome