Suction Filters Mesh

Suction Filters Mesh The Suction Series Strainer promotes a compact design with multiple configurations to fit the exact end use application. The Standard Suction Strainer has a molded 304 Stainless Screen. A Stainless steel Body with 304 Stainless Screen is available.  Suction Strainers have a Female Friction Fit and are called out according to the size of a Female NPT fitting. Suction Strainers have a true threaded Female NPT connection. Raw Material : Material:ASTM A 240,ASTM A 666,SUS304.SUS316.SUS316L wire  and plate.Size: Stainless steel Body Options 1/4, 3/8, 1/2, 3/4, 1, 1-1/2 Female NPT ,1/4, 3/8 Hose Barb Stainless steel Body Options 1/2, 3/4, 1 Female NPT  Mesh normal size :12,16,18 ,20, 30, 40 (Standard), 60,80 Mesh Layer : single layer or double layers are available  suction strainer mesh Single screen  Single mesh  Thread 1” 10mesh  Single mesh  Thread 1” 15mesh  Single mesh  Thread 1/2” 15mesh  Single mesh  Thread 3/4” 15mesh Double Mesh Suction Filter  Thread 3/8” 30mesh Suction Filter  Thread 3/4” 30mesh Suction Filter  Thread 1” 30mesh  Suction Filter  Thread 1/2” 30mesh  Suction Filter  Thread 3/8” 60mesh  Suction Filter  Thread 3/4” 60mesh  Suction Filter  Thread 1” 60mesh  Suction Filter  Thread 1/2” 60mesh Glory suction Strainer Elements are manufactured using stainless steel wire screen media. Suction strainer elements are only intended to protect hydraulic pumps against catastrophic failure caused by coarse contaminants. Suction strainer elements should be inspected and cleaned regularly. Suction strainer elements should not be used as the only filtration elements in a hydraulic system. Pressure filters and return line filters, with reasonable dirt holding capacity, must be installed to provide protection against component damage caused by fine contaminants.