High Speed Corrugator Belt

Specifications: Material: Synthetic Material Thickness: 9mm Width range: 1000mm - 3200mm Heat resistance :220℃ Weight : 7.5kg/㎡ Suitable speed：≤ 250m/min      Feature of High Speed Corrugator Belt: High absorption of moisture and low noise Suitable for averange liner machine speed Longlife time running Suitable as top belt and bottom belt  Different Joint For Corrugator Belt   Hot Clipper Lacing With Flocking     Clipper With Rubber Coated   How To Cleaning Maintenance Of Corrugator Belt?   It is better to thoroughly clean  the corrugator belt once time per month. Here are some detail steps: 1. Keep the machine running with slow speed; 2. Make the corrugator belt fully moist by water or low pressure steam spray with  much water content; 3. Put into some detergent and clear up the dirt & paste scar with soft brush;  4. After cleaning,using water to wash the belt again; 5. During the washing process,it will be greatly help to lay out shallow U-shaped iron plate or shallow groove under the corrugator belt.It will make the cleaning  water flow out to the machine outside,keep the heating panel clear and no  any corrosion; 6. When necessary, you can turn on steam to heat the heating panel and make the  wet corrugator belt drying with slow speed.  Contact Us Now: t Tel:0086-0311-80690567 Mobile（whatsapp/wechat): 0086-17732852675 Skype:huatao07