Titanium Seamless Tube，Titanium Tube，titanium Pipe,Titanium Square Tube，Titanium Welded Tube ，

1. Introduction Seamless titanium tube is made of titanium or titanium alloy without welding through the formation of pipe. 2. Materials & standards Materials Grade 1, Grade 2, Grade 5, Grade 7, Grade 9, Grade 12 Standard Alloy titanium Gr.1,Gr.2   ASTM B861, ASTM B862, ASTM B337, ASTM B338 and ASTM 4942 Gr.5(Ti-6Al4V),Gr.7(Ti-0.2Pd), Gr.9(Ti-3Al2.5V),Gr.12(Ti-0.3Mo-0.8Ni) Technique hot rolled, cold rolled States Annealed (M) Shape Round, square, coiling Surface Pickling or Bright 3. Application Titanium tube is widely used in chemical equipment, electrical equipment, desalination of sea water, salt-making equipment, ocean anti-corrosion, petroleum drilling equipment, automobile and motorcycle exhaust pipe, heat exchanger, condenser, heater distiller, reactor, separator, evaporator, etc… 4. Chemical Requirements  Grade N C H Fe O Al V Pa Mo Ni Ti GR 1 0.03 0.08 0.015 0.20 0.18 / / / / / bal GR 2 0.03 0.08 0.015 0.30 0.25 / / / / / bal GR 5 0.05 0.08 0.015 0.40 0.20 5.5~6.75 3.5~4.5 / / / bal GR 7 0.03 0.08 0.015 0.30 0.25 / / 0.12~0.25 / / bal GR 9 0.03 0.08 0.015 0.25 0.15 2.5~3.5 2.0~3.0 / / / bal GR 12 0.03 0.08 0.015 0.30 0.25 / / / 0.2~0.4 0.6~0.9 bal 5. Physical Properties Grade State Tensile strength(min) Yeild strength (min) Elongation (%) Ksi MPa ksi MPa GR 1 （M）Annealed 35 240 20 138 24 GR 2 （M）Annealed 50 345 40 275 20 GR 5 （M）Annealed 130 895 120 828 10 GR 7 （M）Annealed 50 345 40 275 20 GR 9 （M）Annealed 90 620 70 438 15 GR 12 （M）Annealed 70 438 50 345 18 6. Production specifications Types OD (Outside Diameter)  (mm) Wall Thickness   (mm) Length   (mm) Thin wall Tubes 3 - 133 0.5 – 12.0 Max. 12000 Thick wall Tubes 50 - 80 1.0 – 100.0 Max. 4000 Note: Non-standard sizes are also available. 7. Delivery We can deliver the Titanium products according to the stock status, usually 3-25 days. 8. Packing Details Packed with wooden case, cardboard case or according to the requirements of customers