Vehicle Test Bench Auto Speed/Durability/Mileage Test,Mot Testing Station OBD

Vehicle Test Bench   ACD-3T/10T/15T/18T Summary: ACD-3T/10T/15T/18T vehicle test bench (hereinafter referred to as the test bench) is suitable for speed test and durability test of various types of automobiles with rated bearing mass not greater than 3T, 10T, 15T, 18T, and can meet the test of front-wheel drive vehicles require. When test the vehicle, put the driving wheel of the inspected vehicle on the roller of the test bench, and the rotating wheel drives the roller to rotate. The rotational speed sensor installed on the test bench converts the rotational speed of the roller into a pulse signal, and then calculates. The linear velocity of the surface, and the data value is displayed. Test data can be saved, edited and generate report to print out. The test bench is mainly composed of a host table, a lift device, a sensor, a control system, an industrial computer, a computer display, and a printer. Mainly used in testing stations, automobile factories, schools, driving schools, etc. Support OEM, please contact us for details. Main parameters:   Model ACD-3T ACD-10T ACD-15T ACD-18T Rated load qualit(kg) 3000 10000 15000 18000 Range of speedometer inspection (Km/h) 0~120 0~120 0~120 0~120 Working air pressure(Mpa) 0.7~0.9 0.7~0.9 0.7~0.9 0.7~0.9 Solenoid valve supply AC 220 V  50 Hz AC 220 V  50 Hz AC 220 V  50 Hz AC 220 V  50 Hz Drum dimension  d×l(mm) Φ190×850 Φ190×1150 Φ190×1150 Φ320×1350 Inside width × Outside width of drum(mm) 700×2400 700×3000 700×3000 700×3400 Overall dimensions l×b(mm) 3000×770  3600×770 3600×770 4200×1050   Main Functions: According to the testing requirements, it can be adapted to the testing requirements of the working condition method. All vehicle loading decelerate working condition method detection. Measure the time and distance the car takes to glide at a given speed. Measure the time and distance the car takes to accelerate at a given speed. Vehicle speed test. Vehicle mileage test. Measure the rated torque working condition. Measure the rated power working condition. Measure the output power of the chassis at constant speed. Measure constant torque chassis output power. Measure tire output power. The power can be tested at multiple speed points, and the speed relationship curve can be displayed. Anti-drag experiment of chassis (rack) power loss. It can detect fuel consumption/electricity consumption per 100 kilometers (additional fuel consumption meter/electricity consumption meter). Vehicle pollutant emission detection (replacement emission detector).   Application Scenarios: Some user application scenarios It can be used in testing stations (with diagnostic ccanner), vehicle factories, schools, driving schools, etc. It provides the school with an automobile test bench program, and students of automobile related majors can use our automobile test bench to practice, train and master relevant knowledge points and skills, which greatly improves the teaching quality and efficiency of the school. Application Scenarios: Vehicle incoming quality inspection, Pre Delivery Inspection, after-sales maintenance&repair,etc Recommended Users: Automotive manufacturer,Mot Testing Station,University_Automotive major,etc.