GKBM NT-W2114L-7 Anti-Mildew Noise Reduction North American Walnut Block Unilin Click SPC Wood Flooring

GKBM NT-W2114L-7 Anti-Mildew Noise Reduction North American Walnut Block Unilin Click SPC Wood Flooring SPC Flooring Stone plastic composite flooring, SPC flooring, is a new type of high-quality ground decoration material. It adopts natural marble powder to form a solid base with high-density and high fiber mesh structure, and its surface is covered with super wear-resistant polymer ethylene wear-resistant layer, which is processed through hundreds of processes. Polyvinyl chloride resin is an environmentally friendly, non-toxic and renewable material. Specifications Manufacturer: GKBM Brand: Greenpy Series: NT Series Stone Grain Flooring Decoration layer: North American Walnut Block Product Name: Stone Plastic Composite Flooring (SPC Flooring) Normal size: 1220*183mm (popular choice), 304.8*609.6mm Thickness: 4mm, 5mm, 6mm Wear Layer: 0.3mm, 0.5mm, 0.6mm IXPE mute mat: Optional IXPE thickness: 1 mm, 1.5mm, 2 mm Formaldehyde: E0 Fireproof: B1 Antibacterial species: Staphylococcus, E.coli, fungi The antibacterial rate against Escherichia coli and Staphylococcus aureus reaches 9999% Residual indentation: 0.15-0.4mm Heat Stability: Dimensional change rate ≤0.25% Heating warpage: ≤2.0mm, Cold and hot warpage: ≤2.0mm Seam Strength: ≥1.5KN/M Warranty: 20-30 Years Packing: Carton Single pack: 1238*195*55mm - 13 pcs/carton; 2.9m2/carton Features: 1. Green and environmental protection: 2. Ultra-light and ultra-thin: 3. Super wear resistance: 4mm, 5mm, 6mm, 4. High elasticity and super impact resistance 5. Super anti slip 6. Fire retardant 7. Waterproof and moisture-proof 8. Sound absorption and noise prevention 9. Antibacterial properties 10. Small joint and seamless welding 11. Cutting and splicing are simple and easy 12. Quick installation and construction 13. A wide variety of designs and colors 14. Acid and alkali corrosion resistance 15. Thermal insulation 16. Convenient maintenance 17. Environmental protection and renewable 18. International Fashion Advantages Installation Steps Installation Notes: 1.The temperature should be kept between 10-30 °C; Place SPC floors at a constant temperature for 24 hours before paving; the humidity should be kept within 40%. 2. Basic ground requirements: (1) The height difference within the 2m level shall not exceed 3mm, otherwise self-leveling cement construction is required to level the ground. (2) If the ground is damaged, the width should not exceed 20cm and the depth should not exceed 5m, otherwise it needs to be filled. (3) If there are protrusions on the ground, it must be smoothed with sandpaper or leveled with a ground leveler. 3. It is recommended to lay a silent pad (moisture-proof film, mulch film) with a thickness of less than 2mm first. 4. A minimum 10mm expansion joint must be reserved between the floor and the wall. 5. The maximum length of horizontal and vertical connection must be less than 10m, otherwise it must be cut off. 6. During the installation process, do not use a hammer to forcibly hit the floor to prevent damage to the floor slot (groove). 7. It is not recommended to install and lay it in places such as bathrooms and toilets that are soaked in water for a long time. 8. It is not recommended to lay in outdoor, open-air balcony sun room and other environments. 9. It is not recommended to lay it in places that are not used or inhabited for a long time. Ordering Info Item Code Description Model NT-W2114L Color 1 See color card 2 3 4 5 6 7 8 9 Size A 183*1220mm (7*48") B 304.8*609.6mm (12*24") C customized size Thickness 40 4mm 50 5mm 55 5.5mm 60 6mm Wear Layer TH: 0.3mm FV: 0.5mm SX: 0.6mm IXPE (optional) N Without W With IXPE Thickness 10 1mm 15 1.5mm 20 2mm GKBM Company Profile Xi 'An Gaoke Building Materials Technology Co., LTD (GKBM) was founded in 2005 with 410 million yuan registered capital. The total assets are more than 2 billion yuan. The staff is more than 1500 people in China. It is a subsidiary company of Xi'An Gaoke Group, which was founded in 1992. GKBM is also a council member of China Building Decoration Association. GKBM owns two SPC flooring production bases in Shaanxi and Zhejiang. The company has more than 20 years of experience in production and processing of chemical construction products. Its unique production technology and leading technology make product better and more stable. FAQ 1. How do I repair a chip or scratch in my vinyl flooring? Chips and deep scratches in SPC generally cannot be removed, but can be hidden or concealed. To remove scuff marks try rubbing a drop of mineral spirits, turpentine, paint thinner, or baby oil over the mark. Then wipe the scuff away with a soft cloth. Be sure to wipe the SPC floor thoroughly with a damp cloth afterwards, as these solutions can leave. 2. Are you a factory of SPC flooring? Yes! There are two production bases, one in Shaanxi, one in Zhejiang. 3. Can you provide the floor accessories? Yes, there are skirting, reducer, T-molding and so on. 4. Do you provide OEM service? Yes, customers can choose size, thickness, film thickness, mute mat type and thickness, etc. 5. Can you help to design a color film based on our requirements? Yes, we can customize the color design which is unique. There are 10,000 kinds of color cards and patterns for choose. 6. What is the average lifetime of a SPC flooring? The lifetime of SPC flooring varies widely because of differences in the quality, paving, maintain. SPC flooring generally lasts from five to 30 years. How well you care and maintain your floor will also impact its working time. Contact: Xi'an Gaoke Building Material Technology Co., Ltd. Office Address: Floor 9, 10, Building A, Gaoke Wisdom Park, No.59, Jinye Road, Gaoxin District, Xi'an city, Shaanxi Province, China.    Zip Code: 710075 Phone: 029-88316613 Fax: 029-88311243 Contact person: Ms. Zhang: +86 15829290083