FC-TX24 Ultra Fine High Speed Wire Annealling Tinning Machine

 FC-TX24 Ultra fine High speed Wire Annealling Tinning machine The technology of this machine is brought from Japan,and put into production in Jiangsu. Merits:Easy to operate,good annealling heat insulation,save power,adopt nitrogen or steam protection,have individual meter counter for each take up bobbin,stop automatically achieve the present meter.It may realize ultra fine annealing tin and achieve industry-leading level. Equipment Model FC-TX12 FC-TX16 FC-TX24 FC-TX32 FC-TX40 Twisting Usage It is applied to the annealling and tinning of ultra fine rond copper wire and alloy wire Inlet Dia（mm） φ0.016～φ0.05 φ0.03～φ0.08 φ0.04～φ0.127 φ0.05～φ0.127 φ0.05～φ0.127 Max numbers of inlet wire 12 16 24 32 40 Linear Speed max:300m/min Pay off Method Brush pay off Annealling Furnace Length 2m 2m 2.5m 2.5m 2.5m Annealling Method Tube Annealling Annealling Protection Method Nitrogen Protection or Vapour Protection(Selected by Customer) Tinned Method (Hot dip) Capstan Control Method Inverter+Motor Control or Adopt Stepless Speed Regulation Motor(Selected by Customer) Main Power 24KW 26KW 40KW 50KW 55KW Take up Control Take up is voltage regulator control the moement motor Take up Bobbin Size 3inch，5inch 3inch,5inch，8inch Traverse Control Method Inverter+Reducer Motor Control Ball Screw Traversing,Photoelectric Induction Reversing Inverter+Reducer Motor Control Toothrow Traverse Meter counting Method Single-head independently meter counting,and the machine will stop when the present length is arrived 无 Installation Size(mm) 13000*1000*1250 14000*1000*1250 17000*1250*1850 18500*1500*1850 24700*2200*2100