Industrial Big Ginger Washing Machine Ginger Cleaning Machine

A.Brief Introduction 1.The ginger washing machine is our special manufactured equipment suitable for cleaning ginger with high capacity and no damage to the big gingers. 2.The machine is coming with air bubble cleaning part and high pressure spraying parts.Also configured with filter conveyor which could take out the sand and dust. 3.After the air bubble cleaning part, there are high pressure spraying cleaning nozzles which could wash every angle of the gingers with turning over conveyor.This assures thoroughly cleaning and better effect. 4.With double filters system, the water could be cycle used. 5.The spraying rinsing part should be connected to water supply and keep rising. B.Specification: Item Spec. Model JME6500 JME8000 JME10000 Motor 2.2kw 2.2Kw 2.2kw Water pump 11kw 22kw 22kw Air pump 3KW 3KW 3KW Water consumption 3-4m3/h Conveyor width 800/1000/1200mm Water pressure 4-6 bar Capacity 2-3 ton/h 5-7 ton/h 10 ton/h Machine size 6500x1680x2200(mm) 8000x1680x2200(mm) 10000x1680x2200(mm)   C.Features: The special ginger washing machine is configured with 2 parts cleaning: 1.Air bubble washing to wash and remove most of the sand, dirt and stones etc. 2. High pressure spraying cleaning part to clean the hard dirt etc attached on the ginger. This part is configured with double layer conveyors: the top one is used for transfer the gingers while high pressure sprayed cleaning and the bottom conveyor for collecting the washed off dirt,dust,skins etc to release and will not be recycled in the water. The water could be recycled used with good cleaning effect. Please contact us,advise your processing product and capacity per hour,we will choose suitable machine for you. PIC:Doris Sun,