Quick Details
- Processing Time:-
- Port:-
- Supply Ability: -
- Brand Name:
Product Information
Item Name:
High quality CO2 laser machine for Skin care
Item Code:
DM-801
Wavelength:
10600nm
Laser apparatus:
Sealed off laser device simulated by direct current
Optical beam quality:
TEM00
Output power:
30w
Spot size:
0.02~0.05mm2
Aiming beam:
Red semiconductor laser (635nm, less than 5mw)
Beam transport device:
Articulated arm with 7-joint and balance weight
Working mode:
Continuous operation
Output Mode:
Continuous, single pulse, interval pulse and super pulse
Scan scope:
Max 20mmx20mm
Scan graphics:
Circle, triangle, square, rectangle,hexagon, ellipse, line
Scanning Mode:
Random , Normal and Midsplit scan
Scanning speed:
More than 10m/s
Energy:
1- 30W
Pulse width
0.1-5.0ms
Distance:
0.1-2.6mm
Input power:
450VA
Cooling system:
Water and air circulation
Environment temperature:
5℃~40℃
Relative humidity:
Less than 80%
Power:
220V, 50HZ
Theory
This machine adopts CO2 laser technology
and precise control of the scan technology,
using the CO2 laser’s heat penetrating action, in the guidance of the scan precise
scanning, 0.12mm diameter thin minimally invasive aperture was formed by lattice-shaped
on the skin. Skin in the effect of the laser energy and heat, wrinkle or scar tissue was
uniform gasified instantaneous and formed minimally invasive hole as the center of the
micro-heating zone, so as to stimulate the skin synthesize a large number of new collagen
tissue. and thus start the tissue repair, collagen rearrangement of a series of body's
natural healing mechanisms. Fresh collagen random regenerate, make the treated area
of skin becomes smooth, firm, elastic, pores shrink, wrinkle reduction , bags under the eyes
disappear, the pigmentation disappear, superficial scar calm, skin texture and skin color
gradually improved significantly.
Application
•Fractional skin treatment has been used
effectively to:
•Reduce lines and deep wrinkles on the face
•Civatte
•Tighten skin on the face and neck
•Change the appearance of scars
•Improve skin tone around eyelids, jowls and neck
•Rejuvenate sun-damaged skin and improve texture
•Remove pigmented lesions
•Improve tone and texture on the chest, arms, and hands
Machine Introduction
1. Joints of seven light guide arm
By seven joint light guide arm to complete the laser beam transmission
The light guide arm is the role of the laser transmission to patients to operation site
(target).
2. Scanner
Graphics scanner can scan output, rectangular, round, hexagonal, triangular and
other graphics, the largest area of about 20 * 20mm2 scanning;
3. Main unit
It includes a high voltage power supply, a low-voltage power supply, control system,
cooling system, laser system and blowing system.
4. Touch display panel
Mainly used for parameter setting
5. Emergency stop switch
It is a push button switch. When the instrument is an exceptional condition, can
press the emergency stop switch to cut off the power supply system of instrument.
6. Key switch
A key into the key switch, go to the "open" position, the instrument power on, go to
the "off" position to cut off the power, turn off the instrument.
7. Wheels
8. Refrigeration head control switch
9. Refrigeration head power supply plug
10. Refrigeration water circulation joint
11. Vent
12. Foot switch socket
13. Internal debugging interface
14. Air switch (switch)
The total power supply control machine
15. The power input socket
16. Add the water faucet
17. Data line connector
Used to connect the scanner data line
18. Aiming light switch (applicable to individual models)
Press this switch can be closed at the light.
19. Aiming light regulating potentiometer (applicable to individual models)
You can adjust brightness aiming light through a rotary potentiometer in the
treatment process.
20. Air blowing port
Company Informations:
Welcome to DIMYTH !
