Quick Details
- Processing Time:-
- Port:-
- Supply Ability: -
- Brand Name:-
DP Series transfer printing machines are produced with 3 different drum diameter and 3 different drum width options as follows; Ø400 / Ø600 / Ø1000mm cylinder diameter and 1900/2200/3300 mm.
Offers multiple configuration options to help easing the producing process. DP Series machines are more industrial machines than the MP Series, with bigger drum sizes and width options, thus
increasing the printing speed accordingly. DP Series are capable to work with both rolls and pieces. Is an excellent transfer printing machine choice for bigger businesses, as it offers an
exceptional printing experience and convenience for the users.
Click to See Size Options
DP-19B400C | Ø400mm x 1900mmDP-22B400C |
Ø400mm x 2200mmDP-26B400C | Ø400mm x 2600mmDP-33B400C | Ø400mm x 3300mmDP-19B600C | Ø600mm x 1900mmDP-22B600C | Ø600mm x 2200mmDP-26B600C | Ø600mm x
2600mmDP-33B600C | Ø600mm x 3300mmDP-19B1000C | Ø1000mm x 1900mmDP-22B1000C | Ø1000mm x 2200mmDP-26B1000C | Ø1000mm x 2600mmDP-33B1000C | Ø1000mm
x 3300mm
OPERATION TYPES
Digital Paper Rolls to Pieces of Fabric
Digital Paper Rolls to Rolls of Fabric
Digital Paper Pieces to Pieces of Fabric
OTHER SCOPES OF USE
Film Lamination
Serigraphy Transfer Printing
Offset Printing
Flock Transfer
Stone Printing
DRUM SPECIFICATIONS
The drum is made of ST44 drawn steel pipe and all standard models are finished with surface grinding. On request the drum surface can also be plated with either chrome or
Teflon. Inside the drum is one single heating unit that consists of three pieces. The drum is filled with transfer heating oil that fills up 60% of the inner volume. The failsafe-switch
mechanism helps balance the inner pressure, and will deactivate the machine should there be any issues regarding the gasses generated by heated oil so to avoid injury or damage. The heat
sensor is placed on the surface of the drum, this enables more accurate readings and provides better print results. Maximum Working Temperature and Temperature Restrictions can be easily
adjusted via the Touch-Screen Panel.
FELT SPECIFICATIONS
All of our machines are equipped with 100% Nomex seamless industrial felt belts that are reinforced with Kevlar material in order to avoid stretching. The expected lifetime
for the belt on this unit is between 3 & 5 years depending on use. In order to eliminate movement of the felt belt to either side the machine is built with an automated-felt centering
mechanism. The felt tension and the felt centering system are both airoperated (Pneumatic). Should the compressor fail to supply the required air for the system, the machine halts and
alerts the operator to prevent lasting damage to the belt.
TOUCH SCREEN CONTROL PANEL
General control of the machine such as speed, temperature etc.
Metre Counter
Weekly Programming
Auto- Cooling
Touch-screen to Access various functions
MATERIAL INPUT / OUTPUT CONTROLS
Protection Paper
Input :
Manually Adjusted Brake System
Output : Manually
Adjusted Automatic Rewind
Digital Paper
Input : Manually Adjusted
Brake System
Output : Manually
Adjusted Automatic Rewind
Roll Fabric
Input : Manually Adjusted
Fabric Tension System
Output : Manually
Adjusted Automatic Rewind
Piece Fabric
Input : Manually laid on
table
Output : Off the protection paper