DEGONG Beer Fermenterequipment 10bbl 1000L Unitank Available

Our Fermentors and Bright Tanks come standard with the necessities and are backed by an industry-leading 5-year warranty. With an impeccable interior finish, dual-zone jackets for complete temperature control, and easy installation, you can have confidence you purchased the best product at the best value. 10BBL FERMENTOR / UNITANK DEGONG Beer Fermenter equipment Key features include: 15 psi design pressure 3mm, fully-welded, 304 stainless steel exterior shell with #4 brush 2mm, 304 stainless steel interior shell Interior finished to Ra 0.8 micron sanitary finish and passivated 60-degree cone bottom, jacketed Independent dimpled cooling jackets (cone and cylinder) with individual glycol inlet and outlet Rotating rack arm with butterfly valve and cover Bottom dump 1.5" tri-clamp fitting with butterfly valve, elbow, and cover Aseptic-style sample valve CIP arm with spray ball and piping Blow-off port Vacuum and pressure relief valve 4"-thick polyurethane insulation for cooling jacket and cone Shadowless side manway door 10" diameter top hatch 3" dial thermometer Pressure gauge A Bright Beer Tank is a dish-bottomed pressure-rated temperature-controlled tank used to hold beer in preparation for packaging. The term “bright” refers to “bright beer,” beer that has been rendered bright (clear) by filtration, centrifugation, fining, and/or maturation. In most breweries, beer will be filtered after leaving a uni-tank or lagering vessel and be directed into a bright tank. If the beer is to be force-carbonated, then the beer may be carbonated in-line, under pressure, between the fermenter or lagering tank and the bright tank. In this case, the beer should arrive at the bright tank with full carbonation. For in-tank carbonation (or adjustments), the bright tank will be fitted with a carbonation stone, a device through which carbon dioxide is forced, dispersing fine bubbles into the liquid for fast dissolution. Carbonation stones are usually made from either porous stone or sintered stainless steel. After carbonation, the beer is ready to be bottled or kegged (or both) directly from the bright tank. As the bright tank is the last stop before the package, careful attention is paid to quality assurance at this stage.  If you are interested in our brewery equipment/beer fermenters equipment,please give me a message.Contact Alice and my email address is