Ct-G530 SiRF Star V GPS Module GPS Engine Board GPS Module SiRF GPS Receiver

Ct-G530 utilized SiRFstarV™ and features Quad-GNSS for tracking GPS, GLONASS, BDS and Galileo satellites. The product family delivers highly accurate continuous location, advanced power management and high interference immunity. These continue to push the envelope of performance in sensitivity, TTFF and urban canyon availability and accuracy. With a built-in DSP and extremely low power consumption, the family can get fast location fixes for geo-tagging images or videos, asset tracking and wearable applications. Performance - GPS, GLONASS, Galileo, BDS and SBAS reception for high GNSS availability and accuracy - High sensitivity navigation engine (PVT) tracks as low as   * GPS : -165 dBm   * GLONASS : -161 dBm - 52 track verification channels - SBAS (WAAS or EGNOS,MSAS) - Active Jammer Remover, removes in-band jammers up to 80 dB-Hz - Tracks up to 8 CW jammers - Multimode A-GPS (Autonomous, MS-Based, and MS-Assisted), need operator support. - Embedded CGEE / SGEE (With back-end server support) speed up TTFF a lot and makes cold start time to be around 20+ seconds. - SiRFGeoRecovTM Reverse EE makes positioning process being done under power saving mode. - Reacquisition Time : 0.1 second - RF Metal Shield for best performance in noisy environments Hardware and Software - Based on the high performance features of the SiRFstarV™ low power single core logic. - Adaptive micropower controller - Only 50 to 500μA maintains hot start capability (core logic) - < 10mW required for TricklePower™ mode - RoHS compliant (lead-free) - SMT pads allow fully automatic assembly processes equipment and reflow soldering - Advanced navigation features - Smart sensor supported by I²C interface - External interrupt input for context change detection Advantages - Built-in LNA. - Built-in internal ROM and based on Firmware 5.5.X - It can remove in-band jammer up to 80db-Hz and track up to 8CW jammers, so the module can prevent GPS signal interference when design-in the electrical device with noisy electrical signal interferences such as Laptop, mobile phone, DSC, etc. - Maintain tracking sensitivity as low as GPS @ -165dBm, GLONASS @ -161dBm, even without network assistance. (SiRFstar III has only -159dBm sensitivity) - Support SiRFaware™ technology - Support adaptive“Micro Power Controller”power management mode. - < 10mW TricklePower™, so user can leave power on all day instead of power off. - Suitable for battery drive devices that need lower power consumption application - Cost saving through elimination of RF and board to board digital connectors - Flexible and cost effective hardware design for different application - Embed CGEE (Client Generated Extended Ephemeris) that can capture ephemeris data from satellites locally and predicts ephemeris up to 3 days. So if the module was off within 3 days, it could complete positioning process with limited time just like hot start Specification 　Feature Item Description 　Chipset GSD5e/ROM base SiRF starV low power single chipset 　General Frequency GPS L1, 1575.42 MHz Frequency GLONASS L1, 1602~1615 MHz C/A code 1.023 MHz chip rate Channels 52 Sensitivity GPS -165 dB Sensitivity GLONASS -161 dB 　Accuracy Position <2.5 meters Velocity 0.01 meters/second Time 1 uS synchronized to GPS time Datum Default WGS-84 Other selectable for other Datum Time to First Fix(TTFF) (Open Sky &Stationary Requirements) Reacquisition 0.1 sec., average Snap start 1 sec., average Hot start 1~2 sec. Warm start 9~15 sec. Cold start 25~35 sec. Dynamic Conditions Altitude 18,000 meters (60,000 feet) max. Velocity 515 meters/second (1000 knots) max. Acceleration 4g, max. Jerk 20 meters/second3, max. Environmental Specification Operating temperature range -40 deg. C to +85 deg. C Storage temperature range -50 deg. C to +95 deg. C Humidity Up to 95% non-condensing or a wet Bulb temperature of +35 deg. C Jerk 20 meters/second3, max. 　Power Main power input 1.8 ~3.6 VDC input Power consumption Average 60mA (Tracking Mode) Backup Power(V_RTC) 1.8~3.6V DC battery input Serial Port Electrical interface Default UART Protocol messages NMEA-0183@9600 bps Physical Specification 24 mm x 20 mm x 2.9 mm ± 0.3mm