Quick Details
- Processing Time:1month
- Port:shanghai
- Supply Ability: 50 Sets Per Month
- Brand Name:clirik
Hammer Mill Introduction
European Version Coarse hammer mill is engaging in crushing various rocks and stones with comprehensive strength not higher than 320 MPa into coarse powder and small particles, it is widely used
in metallurgy, mining, chemical, cement, coal, sand-making, coal gangue, construction, refractory materials and ceramic industries.
Hammer Mill Advantages
1. High capacity and low power consumption
2. Uniform particle size with high crushing and crushing ratio;
3. Simple structure;
4. Easy operation; low investment.
Hammer Mill Working Principle
European version coarse hammer mill mainly consists of frame, rotor, support iron and grate bars. The frame is divided into two parts: upper part and lower part, which are welded by steel plates
after being cut. Liners made of high manganese steels within the frame can be replaced after being worn out. The rotors consist of turn plates, pin shafts, and hammers which are grouped regularly
in the main shaft. The main unit drives the main shaft through the motor and triangle belts, which, in turn, rotates the rollers. Large materials entering the crusher through the feed inlet are
firstly crushed by the high-speed hammers, and then thrown fiercely to the support iron for further crushing. Qualified materials crushed will be screened out and exit from the gap of the grate
bars while the unqualified will be left in the crushing cavity to be further hammered and ground until reach the standard size. The size of the final product can be adjusted by changing the grate
bars. The gap between the rotors and the grate bars can also be adjusted according to different requirement. To avoid the plugging of the crusher, th proportion of water for the crushing
materials is no more than 20%.
Hammer Mill Technology Data
Type
PC4008-75
PC40012-90
PC40015-132
Rotor Diameter/mm
750
900
1150
Rotor Width/mm
800
1200
1500
Rotor Speed r/min
800-1000
800-1000
550-800
Feed head size/mm
320*930
400*1200
500*1500
Feeding Size/mm
50
60
80
Finished Size/mm
3
3
8
Capacity t/h
10-30
30-60
50-100
Powder/kw
55-75
75-90
110-132
Hammer Number (piece)
18
32
32
Overall Size L*W*H/mm
2310*1665*1610
2840*2100*2020
3720*2650*2540