Suni SuniRay Digital Dental X-ray Sensor

Product Description Suni SuniRay Digital Dental X-ray Sensor Size 1 Functional and Ergonomic Design Designed for all of your intraoral imaging needs, SuniRay sensors are extremely comfortable, flexible and easy to use. Designed with rounded corners for increased patient comfort Built to last with a reinforced cable attachment, SuniRay sensors are extremely reliable and durable The plug and play sensors are easy to install and can be operated in different PC's throughout the practice Since one size does not fit all patients, two sensor sizes are available, including children and adults with special anatomical considerations Integrated USB module allows you to easily move the sensors from room to room Sensor Specifications - SuniRay Technical data Size 1 Size 2 Sensor Dimensions (mm) 39.5 x 26 43.5 x 31.5 Active Area (mm) 31.1 x 20.2 35.2 x 26.2 Sensor Technology CMOS APS Fiber Plate CMOS APS Fiber Plate Maximum Gray Levels 4096 4096 Sensor Cable 3 feet (1m) 3 feet (1m) Cable Attachment Reinforced Strain Relief Reinforced Strain Relief USB Module Integrated USB 2.0 Module Integrated USB 2.0 Module Software Dr. Suni Dr. Suni Warranty 2 years 2 years X-Ray Imaging Properties: Resolution: The pixel resolution of the high resolution (HiRes) sensors exceeds 15 lp/mm. The standard resolution of an X-Ray image, as measured by the modulation transfer function (MTF) exceeds 12 lp/mm. This is measured by using a standard 60 kV intraoral X-ray source. Dose Efficiency: The sensor will produce a high quality image with an X-Ray dose that is only a fraction of the standard dose required by Dental X-Ray film. Diagnostic Efficacy: The system will produce a superior image quality of images obtained when using standard dental X-Ray film. This allows the dentist to diagnose standard intraoral pathologies encountered during screening procedures. Wide dynamic range: The sensor pixel well capacity is very high, allowing a higher accommodation of greyscale (bone density) dynamic range. Sensor Material Biocompatibility Specifications: The sensor's body material and cable material are biocompatible. The sensors and all component materials have been tested to comply with ISO standards, and specifically, the sensor complies with EN IS0-10993 (Biological Evaluation of Medical Devices). Sensor Storage Requirements: The sensor must be stored and operated in at a temperature range between 18ºC and 40ºC. Note:Product configurations (hardware and software) can vary by country. Please contact your local dealer for more information.